Search results

  1. TuckerMAustin

    Anybody know what angle to set Barnes rear shock brackets?

    Just got a rear Dana 44 but the brackets were all toast so ordered all new Barnes upper, lower, and shock brackets for the axle side only… just wondering if I need to set the shock brackets at a certain angle as Barnes doesn’t have instructions. Thanks in advance!
  2. TuckerMAustin

    2000 manual to 2001 32RH auto trans swap

    I actually did get it to work! I didn’t think to take a pic of the final product but it ended up being more simple than I thought. Thanks for your help!
  3. TuckerMAustin

    About to Bypass Neutral Safety Switch

    Got it to work! Thanks so much for taking the time to help.
  4. TuckerMAustin

    About to Bypass Neutral Safety Switch

    Thank you so much. I will try in the morning!
  5. TuckerMAustin

    About to Bypass Neutral Safety Switch

    This pic is what I copied exactly to my harness. Sorry I have a hard time understanding schematics. So maybe the picture is wrong?
  6. TuckerMAustin

    About to Bypass Neutral Safety Switch

    Oh sorry I didn’t see your post! I will look back at it. Thank you
  7. TuckerMAustin

    About to Bypass Neutral Safety Switch

    Okay I will try! I need to move it more towards the back of the jeep so it is further in park right? I don’t have the interlock cable connected either, does that make any difference?
  8. TuckerMAustin

    About to Bypass Neutral Safety Switch

    I tried to start it in neutral and in park but it only starts as soon as I move it towards reverse. Also, my backup lights are not working.
  9. TuckerMAustin

    About to Bypass Neutral Safety Switch

    Sorry to bother again, but my jeep is only starting when in reverse. Weird… any suggestions?
  10. TuckerMAustin

    About to Bypass Neutral Safety Switch

    Jerry, is there any way you could send a picture of where the factory jumper came from? I’m thinking mine may be different because I have a 2000 that came with the nv3550 tranny.
  11. TuckerMAustin

    About to Bypass Neutral Safety Switch

    Thank you for your help Jerry!!
  12. TuckerMAustin

    About to Bypass Neutral Safety Switch

    This is what I wired to fit the nss switch from my manual jumper harness. Let’s hope this works! My ECU is coming back from being reprogrammed today so I will test it once it is delivered.
  13. TuckerMAustin

    About to Bypass Neutral Safety Switch

    Weird. I didn’t find another plug in my harness for the auto. And the auto I have didn’t come with the jumper harness unfortunately.
  14. TuckerMAustin

    About to Bypass Neutral Safety Switch

    Oh okay! It must have already been bypassed by the previous owner because I could always start the jeep without pushing the clutch. I was confused why the manual plug only had 2 pins but the 32RH nss is 3 pins. (I am in the process of replacing the shift shaft seal as you can tell).
  15. TuckerMAustin

    About to Bypass Neutral Safety Switch

    Hey Jerry, can you help me with the nss wiring? I swapped a 32RH into my jeep that had a nv3550 and the last thing I need to finish is the nss wiring. Your help would be greatly appreciated! I bought the plug on the right to plug into the 32RH nss and the plug on the left is the nv3550 plug.
  16. TuckerMAustin

    2000 manual to 2001 32RH auto trans swap

    Hey mrblaine and or Jerry, can you help me with the wiring for the nss? I bought this connector for the nss on the 32RH but I’m not sure which wires to splice together with the harness from the nv3550.
  17. TuckerMAustin

    AX15 manual to 32RH auto conversion

    Okay. Do you know the diameter yours was? Or should I just pull one from a 2001 tj I found nearby?
  18. TuckerMAustin

    AX15 manual to 32RH auto conversion

    Hi Jerry! Did you have to do anything to your front and rear drive shafts when you swapped your trans?
  19. TuckerMAustin

    AX15 manual to 32RH auto conversion

    One last thing (probably not), what would you recommend is the best gearing for the 32RH on a 2000 with 35" tires? I have the 2.72:1 transfer case and currently geared at 3.07 (stock). At least that's what I think the current gears are...
  20. TuckerMAustin

    2000 manual to 2001 32RH auto trans swap

    Thank you for clarifying😂