Search results

  1. grr

    32RH Leak at rear trans seal

    The bearing is not a press fit, I removed mine by hand. Clean and dry the trans housing extension and the seal extension and then apply RTV to the mating surfaces. Hammer the seal extension into the housing extension taking care to tap in as straight as possible. Remove any RTV that globs up...
  2. grr

    32RH Leak at rear trans seal

    Take the transmission housing extension off, remove the bearing inside and hammer the seal extension out from the inside. Take note which way the bearing faces when you remove it and put it back in same way. Not sure that matters but I didn’t want to chance it being wrong. Also be sure to let...
  3. grr

    32RH Leak at rear trans seal

    I had the same leak after swapping in my 32rh and installing a seal extension. I fixed it by removing the extension and reinstalled it with RTV. No leaks since.
  4. grr

    2000 manual to 2001 32RH auto trans swap

    Did you ever get an answer on this?
  5. grr

    Rock Sliders / Rocker Guards Guide

    Yes they do however if possible I would wait and install the corners and the rockers together in order to get the best fit. Check out my last two pics again. To get those seams as tight as possible together with the line under the door and along the soft top channel straight they are best if...
  6. grr

    Rock Sliders / Rocker Guards Guide

    I agree Phillips head screws are better and I used them on my homemade tailgate skin and valance. I used the Allen heads because they came with the rockers, corners, door armor and tub armor. I may swap them out someday when it bothers me more.
  7. grr

    Rock Sliders / Rocker Guards Guide

    After waiting over a year for my Savvy rocker and corner armor order I got a refund and applied it towards Genright mini boatsides, corner armor and other stuff. Done together they match up well and I am happy with the results.
  8. grr

    2000 manual to 2001 32RH auto trans swap

    Try this: https://wranglertjforum.com/threads/converting-a-manual-transmission-to-a-32rh-automatic-transmission.1641/
  9. grr

    2000 manual to 2001 32RH auto trans swap

    I just completed a very similar swap. Here’s a link that will list everything you need: https://wranglertjforum.com/threads/converting-a-manual-transmission-to-a-32rh-automatic-transmission.1641/. Mine is a 2000 manual 4.0L (non-distributor) also and I found a 2000 32rh with computer to put in...
  10. grr

    SOLD Currie Dana 44 Diff Cover

    Currie Dana 44 diff cover. E/W dip stick.
  11. grr

    SOLD 97-02 Auto Floor Shifter, Shift Cable & Bezel

    Auto floor shifter for a 97-02, comes with an extra (better)handle. $60 Shift cable with heat shield. $50 Bezel for a 4sp. Needed if you are doing AW4 swap. $100 Will sell individually or $175 takes all.
  12. grr

    SOLD NV3550 + Swap Parts

    NV3550 with 145k miles. Flywheel , clutch and pressure plate with 15k miles. Block off plate Crank bushing and pilot bearing. Clutch master/slave cylinder. Pedal assembly. Manual transmission mount. Floor plate with boot. Manual PCM. Manual crank sens… Includes all bolts.
  13. grr

    Savvy Mid Arm Trusses and ARB Lockers

    My rear air line was in an inconvenient spot too. I drilled a hole in the truss.
  14. grr

    SOLD Currie Anti Rock

    Yes
  15. grr

    SOLD Currie Anti Rock

    Sale pending
  16. grr

    SOLD Currie Anti Rock

    Yes, pretty often. I have family near Greenville.
  17. grr

    SOLD Currie Anti Rock

    Wichita Falls.
  18. grr

    SOLD Currie Anti Rock

    Excellent condition
  19. grr

    How To Outboard Fox 2.0 RR Shocks

    Question about the frame cut. I did a lot of research and I found that you cut the bottom all the way back to the inside wall of the frame but you leave 3/16”-1/4” at the top. You use this to fine tune the tilt of the shock tower. If you cut the top all the way back to the inside wall of the...
  20. grr

    All in the name of science

    After several years of wheeling with a 4” jj short arm SL, 35” tires, lockers, Fox shocks and other common upgrades I grew tired of the hopping and other bad manners of my rig. After much research I decided to go with the Savvy mid arm kit. Installed it with no other changes and went wheeling...