Search results

  1. grr

    WTB: 1/2 Inch Body Lift

    I have a JKS 1.25” bl I’d take $40 + shipping. I’m in Texas so that might be a deal breaker for you.
  2. grr

    WTB: Johnny Joint Adjustable Control Arms

    PM sent
  3. grr

    WTB: Johnny Joint Adjustable Control Arms

    Actually their website says these work with 0”-7” lift. They do have a lot of adjustment.
  4. grr

    WTB: Johnny Joint Adjustable Control Arms

    I will have a full set (uppers and lowers) of Rokmen adjustable arms for sale in about 2 weeks. These are designed for use with 4”-5” lifts.
  5. grr

    WTB: Johnny Joint Adjustable Control Arms

    Did you ever get your control arms?
  6. grr

    Tie Rod Flip with BMB Sway Bar Link Brackets

    Okay thanks. I believe I once read if you used the split insert not to weld it as it needs to be able to expand and grip the inside of the hole.
  7. grr

    Tie Rod Flip with BMB Sway Bar Link Brackets

    Thanks for the video as I am about to do this mod myself. Was curious about the pre-heating. I have seen both split and non-split inserts. Is one better than the other?
  8. grr

    Where can I get get good parts for 4.0 rebuild?

    I looked at my build sheet from my engine guy again. It doesn’t say anything about new springs so I guess he used the originals.. I’ll have to ask him. Since the rebuild in Jan’17 I drive it everyday and I have also been on several long trips (4-8hr) and it still runs great. Loaded down with...
  9. grr

    Swapping to a HP Dana 30

    An HP30 is a good swap if you can find one cheap ($80) and it includes knuckles and front drive shaft, just for spares. JY guy said have at it.🆒Then you can have it regeared, add a locker, add the Currie JJ conversion kit add BMB tie rod flip kit, clean it and paint it all while you’re still...
  10. grr

    Looking for roll protection cage ideas

    Might look into Koz offroad front cage kits or a TJ. It includes the through the dash A pillar, replacement door bars that provide a windshield attachment, windshield and overhead spreaders and a C pillar spreader. All bent and pre-notched.Hard to drill down and find in their website. Best to...
  11. grr

    Looking for roll protection cage ideas

    So are you using any of the factory roll bar or starting completely from scratch?
  12. grr

    Random photos: Got anything interesting, unique, strange?

    Had to let air out of tire and jack corner of jeep up to get it out.
  13. grr

    Random photos: Got anything interesting, unique, strange?

    Jeep in front of me somehow sucked a rock up in his fender well.
  14. grr

    Recommended fluids for TJ

    Edit- what knowledge? You blew a motor, and you haven’t inspected your new cam after 10k to see if there has been wear. My knowledge that my jeep ran great with regular 10w-30 for 145k miles before it had a broken piston skirt, not a blown motor. And knowing that in all my years of owning this...
  15. grr

    Recommended fluids for TJ

    He wouldn’t be the first builder to veer from a manufacturer suggestion. And comp cams doesn’t assume this is going in a motor with a catalytic converter behind it. Bottom line is our TJs don’t need it.
  16. grr

    Recommended fluids for TJ

    I was offering my real world experience and knowledge that my motor and countless others have been running great without any additives or high zddp oils. That’s all. Suggestions to do all that research about oil for our TJs is just dumb.
  17. grr

    Recommended fluids for TJ

    I bought my 2000 TJ new and always used Pennzoil 10w-30. At 142k miles a broken piston skirt (not an oil problem) caused me to have my motor rebuilt. I had it bored out with new pistons, a mild comp cam and new lifters. My builder said he put break-in oil with a zinc additive included. He said...
  18. grr

    Axle Upgrade

    Picked up my HP30 at a JY for $80. Had locker and gears installed and it sat in my garage until I had everything else ready. 4” lift with 35’s and absolutely no issue with setting caster. Some say it’s stronger, I don’t know. It does get the front drive shaft up out of the way. I read on...
  19. grr

    Black Friday Deals?

    That TRE deal is sweet. 20% off. You can get a 3/8x100’ line with safety thimble for $287. Free shipping. If you want a synthetic line for your winch now is the time.
  20. grr

    Durango power steering box swap issue

    You need to find dead center travel on the box. Turn wheels until they point straight ahead. Remove drag link from pitman arm. Now go rotate steering wheel back to straight. Take shortest path possible when turning and don’t spin all the way around or you could damage clock spring .(You will...