Search results

  1. Blackjack

    Need some help with electrical / wiring

    The connector is Deutsch commonly used as an alternative to Weatherpack in industrial applications. I am sure that suppressor will work fine it just has more going on than just being a diode. With the issues I have had with Eaton in the past I try to not deviate much from what they have used...
  2. Blackjack

    Need some help with electrical / wiring

    I am pretty sure that is not a diode. It is not for noise suppression it is for flyback from the coil on the locker.
  3. Blackjack

    Should I be worried about heat from the winch drum after replacing line with synthetic?

    Unless you do a significant amount of winching out under load drum heat is not that big of an issue.
  4. Blackjack

    Need some help with electrical / wiring

    Maybe this will help https://www.oreillyauto.com/detail/c/standard-ignition/air-conditioning/a-c-compressor-diode/b966b7b5125e/standard-ignition-a-c-compressor-diode-connector/std0/s1473?q=a%2Fc+compressor+diode&pos=0
  5. Blackjack

    Need some help with electrical / wiring

    Lighting does not require a diode you have to add it because of the locker.
  6. Blackjack

    ARB compressor options

    Just running lockers or tire air up too?
  7. Blackjack

    Need some help with electrical / wiring

    No worries on the relay amperage the locker will draw what it needs. More important is the shunting diode (number 5 on your drawing) that needs to be installed. A GM AC clutch diode PT748 works well for that.
  8. Blackjack

    Ramsey winch motor

    I have one that is 7.25" that would probably work if you have no luck.
  9. Blackjack

    Ramsey winch motor

    What dimensions are your old bolt?
  10. Blackjack

    Ramsey winch motor

    You will have better luck to find an automotive electric shop in your area and just take the old bolt in and try to match it.
  11. Blackjack

    Stripped unit bearing bolts

    If you where corrosion is an issue these can be your best friend. https://www.irwin.com/tools/screw-bolt-extractors/9-pc-fractional-bolt-extractor-set
  12. Blackjack

    Arb Compressor percolating oil

    Start with checking your axle vents.
  13. Blackjack

    Looking for options other than Revolution for Dana 30 and Dana 44 5.13 upgrade

    NItro are not a bad choice if you have to go this route.
  14. Blackjack

    Muffler choice for 2.5L

    Well you can tell yourself that but I will not promise it.
  15. Blackjack

    Muffler choice for 2.5L

    My 2.5 has a habit of eating mufflers (and cats) if they are not of fully welded construction. I run a Dynomax (Walker) Ultra Flo Welded but it might be a bit on the loud side for some.
  16. Blackjack

    K&N cold air intake and passing California smog test

    Quick search on K&N site gets you the CARB number https://www.knfilters.com/cold-air-intakes/jeep/tj/4.0l-l6-gas/2003
  17. Blackjack

    Installing a winch, want a relay. Any suggestions?

    So with Warn at least you have to complete two circuits for the control circuit to function. So unless you carry two jumpers and know the pinout on the plug the odds of someone making you winch run are slim.
  18. Blackjack

    Installing a winch, want a relay. Any suggestions?

    85 amp continuous gets the job done. Winching is an intermittent duty operation.
  19. Blackjack

    Installing a winch, want a relay. Any suggestions?

    You will have to use a solenoid like Warn does. If you do not want to spend Warn prices you can just pick up the solenoid https://colehersee.com.au/product/spst-12v-85a-continuous-duty-solenoid/ and make your own disconnect.
  20. Blackjack

    Grease for winch

    #2 would be ok but will increase effort to free spool vs #1.