Search results

  1. roverhi

    What size wheels and tires and why?

    The engine lift saved from having to lower the radiater shroud to clear the fan with the body lift. A 2” spring lift is in the plans for 33” tires. Engine lift will hopefully negate a SYE with the spring lift.
  2. roverhi

    What size wheels and tires and why?

    Running JK Moab 17" wheels, 265/70/17 AT tires (31.6" diameter), 1 1/4" body lift and 1" JKS engine lift. Haven't had any issues except slight rubbing on sway bar at full lock. A couple of washers on the stops would solve that problem. stock without body lift. With Body Lift
  3. roverhi

    Frame coated with VHT

    Poke your fingers in every opening in the frame feeling for rust flakes and rough rusted areas. A borescope is a good idea to get a clear view of the frame internal rust. Drilling water drain holes at low spots on the frame will slow future rust invasion. Spray frame interior with non...
  4. roverhi

    California Harbor Freight Transmission Lift Jack $75.

    Deal on brand new, in box Harbor Freight transmission jack $75. Bought a transmission jack from Harbor Freight knowing I would need it to drop the fuel tank. Took me so long to get around to the tank that I forgot it and bought another one when they went on sale. Jack is in North Oceanside, CA...
  5. roverhi

    How hard is it to replace a 42RLE automatic transmission?

    Deal on brand new, in box Harbor Freight transmission jack $75. Bought a transmission jack from Harbor Freight knowing I would eventually need it to drop the fuel tank. Took so long for me to get to it that I forgot it and bought another one before rediscovering the old one. In the meantime...
  6. roverhi

    Best size tires for a 2 inch lift?

    Running 265/70/17, 31.6" tires with a 1 1/4" body lift and stock suspension. Haven't tried flexing off road but no problem with speed bumps taken too fast. Still running with 3.73 gears, 42RLE and easily live with Freeway and all around performance. Drive conservatively trying to maximize the...
  7. roverhi

    Anyone have solar?

    Inherited a SunRun Lease when we bought the house. Supposedly the PO's son was a salesman for them and put in an over spec'd system with battery. We were selling electricity back to SDGE at a great discount to the benefit of the utility. Had a $500 bill for gas heating and water for one month...
  8. roverhi

    Which size Rubicon Moab wheels for TJ?

    Running JK 17" wheels with 265/70/17 tires. Like the 16" factory wheel set back but couldn't find any at a reasonable price and the limited tire sizes caused me to lose interest. Found the JK wheels with tires and adapters for way less than asking price for the factory 16" bare rims. Photo is...
  9. roverhi

    AndyG is in Jackson, Wyoming

    Where's PETA when you need them. Thought all the Richies had downgraded to fleece.
  10. roverhi

    Barnett Diff Covers

    an earlier Post about the Barnett Dana 30 cover: "Hey Peter. As of now we are building stock of the covers to start production in the next few months. When they come available I will contact you." Received a later Post saying I was on the wait list and they'd contact me when available...
  11. roverhi

    Rear jounce to bump stop question

    A rough estimate from the wear marks on your shock casings looks like your shocks may not be too long, If the shock has compression that isn't marked as a wear pattern on the case, you may be okay which could be if the full articulation seldom happened in the past. Put the shocks back on and...
  12. roverhi

    Found ARB front bumper

    The ARB front bumper protects the fenders and allows better approach angles than stock positioned bumpers. ARB stuff is designed for true Roo protection which makes them heavy but hell for stout. They also require surgery to use with Anti-Rock sway bar. Would've bought one if it wasn't for...
  13. roverhi

    Propane and Propane Accessories

    You take a performance hit if my generator experience carries over to the 4.0. Propane doesn't contain as much energy as gasoline. Does burn clean leaving the combustion chamber looking almost like new after more than 500 hours run time.
  14. roverhi

    Plastic restoration

    Any products that will brighten up the grey flares on an '05 LJ?? Most products seem to be for black flares so might as well paint them if that is the best restoration.
  15. roverhi

    Lets see your TJ with 17" OEM wheels

    Don’t like the looks of 35” tires on 15” rims. Looks like you’ve running on marshmallows. Scored a set of 17” JK Moab’s with adapters and 31.6” AT tires with life left in them. Might have gone with 16” TJ Moab’s because of the deeper back spacing and no adapters for but the ones I found...
  16. roverhi

    Going fast on rough roads

    Cheaper shocks like the Ranchos don't dissipate heat well generated by rapid, large range movement in fast driving on rough roads. That decreases their ability to cushion or even causes them to quick working all together. if you are addicted to fast driving on bad road, reservoir shocks might...
  17. roverhi

    EV thread

    Electrons are animate objects with a mind of their own. When they go off on an intermittent toot you can't do anything except wait it out. Unfortunately it means the mechanic can't duplicate the problem and replace whichever part is faulty. Have an acquaintance who bought a new Cadillac that...
  18. roverhi

    The Arc Vector

    At least it has useful range for a Sunday Cruise. Most electric MC's are dead after 50 miles. Of course those miles come at a price which is probably well into 5 figure $ since it's basically a completely custom, low volume bike.
  19. roverhi

    Low Engine Compression

    Take the head to a machine shop. They'll tell you what needs done to it to make better than new. Personally would have them install new guides. springs, and do the valves even if it's just a head gasket problem you've got now. You will then only need a reman. short block when the bottom end...
  20. roverhi

    What all do I need to do to upgrade a stock 06 Automatic Rubicon to 35"?

    Currie says you need at least a 2" bump stop extension for their steering gear on any lift from 0-4". You also may need to do other mod's to fit the CurrectLync. Savvy's reason for the extra 1/4" is that the NP241 Transfer case is slightly taller than the 231 and the added lift height...