Search results

If anyone is the Central Illinois area is interested i just took my Rubicon to Peterson's Automotive & Diesel in Sunnyland Illinois to have some work done. I can not say enough good things about this place. They have very reasonable rates and treat you like family. I will be using them for all...

If anyone is interested in purchasing anything from Spiderwebshade.com i have a code for 10% off. Use the code Jeremyk10

:oops: What did i just look at?

I currently have the 3" BDS lift and i just replaced the shocks that came with the kit with the Rancho 5000x's and wonder why i hadn't done it sooner. The Rancho shocks are a big upgrade from the NX2's and work well both on and offroad. They are highly recommended on this forum - (thanks again...

I know these are not tube doors but they are another EAG product!! I purchased their pocket style fender flares and was very surprised with the quality of them. They look great and didn't cost me and arm and a leg!!

I agree with Alex on the shock recommendation. When i joined this forum and asked for a shock suggestion it was the Rancho RS5000x that were highly recommended. I purchased them and can't believe the difference it has made in my ride. You can't go wrong with the Ranchos and they are very affordable.

Thanks to everyone who reached out to help me on my Rubicon steering issues. My knowledge is slowly growing with all your help!! I have since replaced both the steering stabilizer with the Rancho RS5000 and the dropped pitman arm back to a OEM stock one per Jerry's suggestions. Man what a...

MrBlaine, So if i use the following i will be good to go for my 2003 Rubicon? Front - Spicer inner axle seal 54381 (qty 2) Mopar axle shaft guide 68002412aa (qty 2) - not required but makes re-installation of the front shafts without damaging your newly installed seals a little easier Rear...

Yes i realize that the old ones will have to be removed and the new ones pressed on. Thanks for your help.

So those seals will work for both the front and rear axles and all i would need besides the seals are a SET10 Bearing kit for the rear?

Those seals say they are for Dana 30. Will they still work for the Dana 44's i have?

I used the search but could not find what i was looking for. I apologize if i failed on the searching end of it and this has already been discussed. If so if anyone could point me in the right direction i would appreciate it. I need some help identifying which parts i need to collect to replace...

Can anyone point me to a decent mechanics shop in Central Illinois (Peoria area) that they trust. I have some things that need replaced on my Rubicon that are above my expertise level. Thanks in advance.

I found this info off Currie's website: The Currie Currectlync® heavy duty tie rod and drag link system for TJ, LJ, XJ, MJ and ZJ vehicles features, a 1 ¼" diameter forged alloy drag link, and 1 ¼" solid alloy steel tie rod bar that is bored and threaded on the ends. All 7/8" thread tie rod ends...

Thanks for your help. Let me know if you see anything different tomm when you are at your desktop. I will look for a OEM pitman arm and i was looking at replacing the damper with a Rancho one!

Yes its a 2003 Rubicon!!

I was going to replace my steering stabilizer on my 2003 Rubicon but when i started looking at the setup my jeep had it did not look like a stock setup to me. The attachment areas look different than the stock photos i have looked at. I am not sure exactly what setup is installed but i am...

Bought a new set of fender flares for the Rubi and painted them to match the originals this weekend. The originals were in very sad shape when i bought it. I used metallic Krylon Fusion paint and I think they turned out pretty nice. My son helped me install them tonight and we both were very...

Welcome and nice ride!

Im not the original owner as i just bought my Rubi and it was on it.