Search results

Yes they are 17's

Not much, but has been rebuilt by me,,

Good to know about the brackets I have, I might be cutting the lower spring perch, Thanks

I am starting on a TT also. I will be installing a SYE and Woods DS. If you are doing the SYE will it not be enough to keep from using the relocation brackets? I also have the angled track bar mount, upper spring location bracket and the lower shock mount. The shock and spring mount just in case...

Thanks for all the replys, I start the rear change out and SYE/driveshaft tomorrow.

How much rattling will I get when installing a Savvy TT? Going to start the rebuild next week. Changing the rear Dana 35 to a Dana 44 with 4.56 gears and ARB locker, also adding a SYE and Woods DC drive shaft and replacing the clutch while it's apart. The front Dana 30, adding ARB locker with 4.56 gears...

I have the Savvy kit, just got it Friday the 13th. Doesn't look like they are discontinued, just back ordered. Also I think I got the last one they had for a 2006 TJ, before they went on backorder.

Have you checked the vacuum canister under the battery? Mine was doing the same and I found a cracked line going into the canister.

I have noticed that the compressor stays on the whole time, it never cycles. So I added Freon to see if that would help. But I will try cleaning the plugs, maybe that will help, Thanks

This is the second time that this has happened. One other time while riding some trails. The same thing happened, no AC and the temp started to rise around 220 until I turned the AC off and temp went back to 210. I will try again today and see what happens, Thanks for the help,,

I have a 06 TJ that the AC works sometimes then it won't. I checked the Freon and added about a half a can. It started working after I turned it to Max AC and also work on the other 2 settings. While driving it yesterday I got stuck in traffic and turned it on for a little relief. It wouldn't...

Thanks for the help,,

I installed a Uniden 520XL radio. I ran the power wire directly to the battery. The ground wire as close to the radio as possible. The antenna mount is a teraflex, behind the drivers side tail light. I have grounded the bracket from the inside and behind the light. Today I installed a ground...

The spiders didn't come with a backing plate, but I added one anyway. So maybe it is a little stronger.

I will be adding the 1.25" body lift when the body mounts get here. Some of them were busted and hanging loose. When I get done I will send or post pictures, before and after.

Hope to see next week, when everything gets here. As of now with the BL and TC drop, there is no wobble or shimmy at 65 mph.

I put Poison Spyder on my TJ.They are 1/4" thick, has the bar and step, very heavy made. They bolt to the body mounts and along the side of the Jeep. Very solid when mounted. They were bare metal, so that is another thing to consider. Buy them ready to bolt on, or? I am going to install a 1.25"...

Sorry, I do have the BL of 1.25". I am waiting on new body mounts before the install. Thanks for the help,,,

I just installed the Zone 3 inch lift on my 2006 TJ, it was the full kit, shocks, springs,etc. It also included the TC drop spacers. Do I need to install a MML with this kit? Also, if I install the MML will I be able to remove the TC drop spacers? Or will I need to install adjustable control...