Search results

Trying to set up my front pinion angle. 5.5" of lift. Driveshaft angle is sitting right at 10 degrees. Setting the upper Control arms to the charts I found online (15-5/8")has my pinion way to low. If I understand it right I want my pinion angle to match the drive shaft correct, so 10 degrees...

Looks like a trip back to the exhaust shop and do something different.

I need to clean up the threads for the diff cover bolts on my Dana 30. I dont have a bolt with me but was hoping to swing stop and pick up a tap on the way home from work. Can anyone help me out with what size Tap is needed?

Since installing my SYE and Adjustable UCAs I am hearing some popping like something is binding and when I checked under my jeep it looks like my trackbar is rubbing on the upper passenger side of the fuel tank. After some google searching I found a few places mentioning an Angled rear track bar...

Anyone have leads on who has Spicer Ball Joints in stock? Rock Auto is out of stock and all the major online places are showing a 20+ day lead time. I called Northridge and they confirmed the lead time. Edit*** I try to avoid ordering Jeep parts from Amazon but they had two kits in stock near...

Sorry, another new thread about my jeeps issues. 99 4.0 with Federal emissions. So one down stream cat. New NTK O2 sensor front and rear. Was reading a steady .89 and found the Cat had been gutted. Replaced the Cat/Head pipe with one from Rock Auto. Eastern Catalytic I believe. Now my rear O2...

For those of you with the capability of monitoring your fuel trims what are you running for Long Term Trims? Ive been working to get my jeeps fuel mileage back to an acceptable level from 8mpg. The latest was finding my Cat had been gutted. Its a 99 Federal Emissions so only one Cat. With the...

I've been chasing low MPG issues and believe I've hopefully gotten that fixed. But I'm still dealing with very strong smelling exhaust. Not like rotten eggs just very strong. Could a bad cat be the cause behind this? I believe I was running rich for awhile due to a broken coolant temp sensor...

Anyone know where I can order manifold bolts for a 4.0? The only ones I can find online are the titanium ones the sell for the turbo manifolds. I looked at ARP and they don't list them.

Anyone running this switch panel? http://www.12voltunlimited.com/Jeep-TJ-Lower-Switch-Panel-Empty_p_63.html It says that some shifter modification may be needed. Just curious if anyone could elaborate on that.

Starting the install of my PSC stuff and the reservoir won't fit on the master cylinder due to the evap components on the inner fender. Any suggestions? Thought about trying to flip the bracket to the inside of the master cylinder but wasn't sure if that would work.

My saga of steering gear bullshit continues. At this point I'm about ready to just buy a PSC system. Anyone have any input on the Redneck Ram set up? I'm on 35s. I'm not sure if I would buy the PSC hydro Assist or just the gear and pump for now and go hydro assist down the road. Just wondered if...

...

Would I be losing anything installing a regular SYE vs a Super Short one? A tummy tuck isn't in the future as I'm on 5.5" springs and not going to do a BL. Just looking at the simplicity of keeping a speedo gear. If there is a good enough reason to go Super Short I will but if I'm not loosing...

Complete axle brake drum to brake drum with a Detroit Locker, Alloy USA shafts, shock relocator brackets, aftermarket diff cover and geared to 4.88 for a whopping $450 from a guy convinced he needed to build a 8.8. Just needs a 4 link truss cut off and new upper control arm brackets installed...

Figured I'd start a thread to track this in one place and share for anyone interested. My factory steering box on my 99 with 160k miles was toast. I was weighing my options between a stock box and a Durango box. I found an new AGR on eBay from a big jeep parts seller at a really good price so I...

Anyone have a set of Rear Upper Adjustable Control Arms? I need a set to get me by for a few months, hoping to pick up a used set at a reasonable price. Ship to Zip Code is 73099

Needing some input from you guys. Scored a built Super 35 already geared to 4.88 for $400. Just have to replace the upper control arm brackets. Where Im stuck is what to do to the Dana 30. Im currently running 3.73s on 35s with a 4.0 5 speed. My first thought was since Im upgrading to just do super...

Picked up a Dana 35 for $50 to rob the shafts out of for spares. Do these casting marks mean anything? The shafts in my TJ don't have anything like these.

Getting quotes for a gear change and Super 35 install on my 99 TJ. Local shop is a Yukon Gear shop so they are pushing the Yukon stuff. Which is fine. I was wanting to run Revolution gears but for a the warranty and having the shop stand behind the gears Im good. My question is how does the...