Search results

Today I took my 4-cylinder, 5-speed TJ to an off-road trail in Colorado. Everything was going well for a while, and then it happened. Going downhill in first gear there came this ugly noise from underneath, as if the gearbox were chewing rocks. Then I came to a complete stop and the noise...

The oil pan gasket on my 2.4 liter is leaking. Has anybody replaced it in their garage? I’m trying to decide whether to try to do it myself or take it to a mechanic. I mean, it seems simple enough. Thanks in advance for any comments or suggestions.

Is that it? I took that picture from behind the battery. If that's it, then in order to replace it do I need to remove the air filter assembly and the heat shield? Thanks.

First I started the engine and the oil pressure gauge was stuck in low, and the “check gauges” light came on. I turned the engine off and back on, and this time the gauge went to the middle point and everything was fine. Fast forward several days and the same thing happened, except this time it...

Look under your rear axle. Are the parking brake cables over or under the sway bar? Thanks.

So I installed ProComp springs that are 2.5” taller than stock and Rancho 5000x shocks (55239 and 55241). I did the following test on the front: with the track bar disconnected but the sway bar link connected on one side, I started lifting the frame on that side, the suspension extends and...

Trying to remove the front track bar. The axle side came off. On the frame side, I took the pin out, removed the nut, but the bolt won't budge. I whacked the frame end of the track bar from one side and the other. I also put the nut back and whacked it, although the angle doesn't let me put a...

First and foremost, let me start by introducing myself. My name is Chris and along with being a successful web designer I am also a huge Jeep Wrangler enthusiast. Many of you would probably ask, "Why would you create a forum for Wrangler owners when there's already several out there?". Good...

The battery on my TJ just sits on a tray with nothing holding it in place. What bugs me about it is that if I were to push it toward the passenger side, the positive terminal ends up very close to the edge of the body. Is there some kind of strap that's missing? Thanks in advance.

I'd like to remove some hardware that my Jeep has on the front bumper that was used to tow it. Take a look at the attached picture. What do I need to do to return it to stock? Thanks in advance.