Search results

  1. D M

    York bracket idler spacer

    Was swapping pulleys yesterday, and I dropped the spacer for the lower pulley like a moron🤦‍♂️ either rolled down the street or went to Heaven in my engine bay... either way I cant find it and had to use a spacer(not the right size but works for now) from ace hardware. Does anyone know what...
  2. D M

    Belt squeal with ORO york bracket and idler

    Ive always had a slight chirp and some other noises ever since installing the york and ORO bracket with their included idler. Am having a very bad chirp/squeak that stays at idle and doesnt go away until high rpms like 2700+. Putting some water on the belt makes it go away- is this a bad belt...
  3. D M

    Midarm "arm" size

    Ordered the brackets and trusses from savvy, but am going to make my own steel control arms with johnny joints for the midarm. Does anyone happen to know what thickness the upper and lowers are? Ill probably use some steel DOM, just need to know the diameters. Thanks
  4. D M

    Misfire Help

    Developed a misfire a few weeks ago, noticed it would only do it when starting the motor after already at operating temp. P0204- is an injector issue but Is this heat soak related? I cannot get it to replicate when the engine is cold, and sometimes it goes away quickly while driving or lasts a...
  5. D M

    Help with evap leak

    Have had an evap leak for a long time now. Am going to get it smoke tested soon. Getting the codes P0442 and P0456. Already replaced the gas cap, my MPG is down in the shitter lately too. Used to get 14.2 pretty consistently, am now averaging 11-13. Ive checked the hoses on the evap...
  6. D M

    Fried PCM

    Long story short my PCM is fried, ended up buying a new one from wranglerfix. We sent it in originally to a PCM repair shop, they sent it back and said "broken tracer-CPU shorted beyond repair." I cant seem to find out what a tracer is and how that can lead to a short. We tried calling but...
  7. D M

    2001 4.0 crank, no start, and no gauge life

    So I found out I have a parasitic drain the hard way, I come home and go to start the jeep after about 5 days and its completely dead. No lights no nothing. I end up pushing it out of the garage and having a neighbor help me jump it, now the fuel pump is somehow dead? I checked all the...
  8. D M

    Weird knocking sound on cold start

    Here in tahoe, done snowboarding... went to start her up in 20 degree weather. She started fine, and then had an intermittent knock which had an irregular pattern... upon popping the hood it sounded like it was coming behind/below the york towards the alternator, but nothing sounded like it was...
  9. D M

    Genright universal crossmember question

    For those that run it, do you have any idle vibes? I currently have the UFC lo-pro mount and the vibes are starting to bother me. I also don't like having to jack the transmission when dropping the tcase skid so I'm hoping I can kill two birds with one stone.
  10. D M

    The Cold Air Intake Thread

    Backstory: Ive seen on multiple forums of occasional arguments about CAI kits and out jeeps, I wanted to try and lay some to rest. For those that know, I've been doing this test for quite a while, mainly which this test was done last winter when I would drive to work in the mornings when it...
  11. D M

    Sticker removal help

    Ive had this sticker on the jeep since I bought it, it was partially removed from the PO so its been cooked on there a while. I cant seem to get it off, Ive used goo gone and heat(not too much since I didnt want to boil the paint). Do you guys have any good way that removes baked on adhesive?
  12. D M

    What is this noise

    Ive got a buddy whose having this weird issue- strange noise coming from rear side of the jeep. He thought it was the gears, got them completely replaced(full gear install) he has a TW shaft that he just replaced all the U joints/greased it(full rebuild), It drives smooth as glass with the...
  13. D M

    (ORO) York belt and idler pulley issue

    Bought a york 210 bracket kit from ORO and the belt was a SUPER tight fit getting onto the idler, now my idler is whistling and I think I need a new one. Cant seem to find the part number. I also noticed that I was sent a different part number for the belt than what was pictured so now im not...
  14. D M

    Speedometer randomly dying

    I've been having this problem that just started about 4 days ago. My speedometer is suddenly dying and not responding with my correlating speed, but then it will randomly come back on to the correct speed I'm at. All my other gauges work, and I pulled apart the dash to clean the connections to...
  15. D M

    Which bulb is the shift light?

    I have the dash open fixing an issue and while im at it id like to pull the annoying shift light bulb. Anyone know which one it is? And will it disable anything else or is it strictly tied to the shift light?
  16. D M

    Help setting up York on-board air

    Back to this, I hate to keep blistering with questions, but you guys are awesome and im having trouble I installed my compressor, no problems. Just need to wire it and plumb lines. I am trying to get a list to gather for what I need fittings/parts wise. I have heard that the threads on the...
  17. D M

    York compressor pics requested

    Hey everyone, I am soon to install my york 210 compressor and would like to get ideas for plumbing the lines. If you wouldnt mind posting pics of your setups, that be great. Thanks
  18. D M

    Spinning bolt help

    I have a weird problem. trying to remove my front TB (axle side) and was able to get the nut off in the tiny hole, now the weird thing is I cant get the bolt out, it spins but in place and cant get it to back out. I have a JKS Tb with the poly bushing in the axle side, and I noticed sometimes...
  19. D M

    Trouble centering axle with track bars

    As I got home from Moab I figured I'd adjust a few things, one being my axles being centered under the jeep. I've heard of disconnecting both trackbars at the axle and jumping up and down on all 4 corners of the bumpers and the jeep will center itself, except mine didn't. It just pulled to one...
  20. D M

    Another CB radio SWR issue

    Hey everyone, trying to get my SWR dialed for the CB radio, Uniden Pro 520xl, 10ft male to male coax cable, 2' firestik on the teraflex taillight mount. Cannot get my SWR below 3, its around 3.7 ish no matter what I do. I used a dremel to get a clean ground for where the extra mounting bolt...