Search results

Hot rodders and racing dude did this for years.

If anyone has info on this that would be great. Also any other technical info that isn’t easy to find?

I know these are not meant to be serviceable.

who likes them?

Any help would be great. Having a hard time finding the correct center bore of 71.5 in a 5x4.5 bolt pattern.

I picked up a set of cheap oem canyon wheels to experiment on. So far so good. I used a 2 3/4 hole saw to open up the centers. The hole saw fits perfectly inside the already machined hub centric ring. The results were now I can run hubs with the stock wheels and with the 3/4 inch wider than...

I’ve been looking and can only find very expensive used ones. I wish I never trashed mine years ago!

I’m looking for wheel options that will fit my hub conversion. I have the smaller ranger style hubs and my current steel wheels are a 3.75 backspacing if I remember correctly. Photos and suggestions would be great. I’m looking at 15s but may go 17s in the future. Thanks.

The best coating would be to hot dip galvanize the frame.

My injectors all cracked in my 2000. I’m on my 3rd set. First set was just age and rust in the fuel system. 2nd set was the BBQ. 3rd set of rebuilds are going strong!

Ditch the hack and tap. I had one and what ended up happening from just normal off roading my mainshaft bent in the t case. SYE and a driveshaft is so cheap now. Just swap it out and be done!

I’ve got about 10k on them and they honestly still look new.

I ran them for two years they were ok they were a bit soft. They were very quiet on the pavement. I was running 35s and they were terrible in the snow. I switched to coopers discovers and they are amazing in the snow and have been great on pavement.

Mine goes out every winter and works off and on. I cleaned the connectors years ago and it worked for a while. From what I’ve heard the clusters do fail after a while. Mine seams to work fine about 6 months out of the year when it’s not freezing.

I wish my rancho 9000s were better. I really wanted to like them. The number one setting felt about like the 5000s it bummed me out.

The rS9000s are way too stiff. Do not buy them. The 5000s are also stiff. Good luck. I put the skyjacker black maxes on mine. They ride softer.

260 miles may be my best without running out of gas. I regularly get 17.3 mpg on a 3 hour highway trip I do about 5 times a year. 4.0 liter 5 speed nv3550 4.88 gears and 70mph on 35s for 3 hours

Yes and before this forum existed pretty sure? Tho I never even looked until I joined a couple years ago. I was running Q’s on stock axles and 4 inch springs and fuck bump stops those limit travel! Lol that was me 20 years ago. I had lots of fun.

I put 36s on mine before it was cool. Rubbings racing!

Air hammer air hammer air hammer