I have the savvy installed by po. My driveshaft angle is so out of whack, I called savvy today to see if they had any kind of special spacer that I could use and the guy at savvy got mad at me before I even finish my question. But bottom line is I have all kinds of vibrations and now T case...
Hey all! Happy holidays and wheeling this time of year.
I currently have the Rough Country 4 inch X series suspension lift, savvy inch and a quarter body lift, JKS adjustable rear track bar, BFG KO2 35’s, chrome moly axles, 4:56 gears front and back, brown dog 1” motor mounts and tummy tuck...
Hey all I want to drop my suspension lift down from 4” to 2”. I currently have a 2 inch body lift and a 4 inch Rough Country suspension lift with adjustable control arms. It’s just too much for a few reasons soooo I was thinking of just dropping down to 2” springs, struts, and sway bar links...
Hey all I’m at an impass. TJ ran great since motor rebuild, drove around one day, came home, went to leave several hours later and bam it won’t start, Sounds like it’s misfiring, but turns over just fine. I have searched a lot of threads here and cannot find what it might be.
Things I’ve done...
Hey all. I’m banging my head against the wall. 2006 4.0, just had motor rebuilt, rv cam, .0003 over. Initial drive after getting her back together and check engine light is on and sputters at 2500 rpm. Code calls for camshaft positioning sensor (which is brand new Dorman that came with OPDA)...
Hey all, hope you are fairing well today. I’m running into an issue finding an inexpensive valve cover for my “06” 4.0L.
Would I be ok to go with an “04” or earlier? I’m not sure if there is any difference.
Hey all, it’s been a bit since I’ve been on here. I just had to walk away from my TJ for several months. Bought a house that needed some remodeling and found that my 06 TJ with 54k miles needs a rebuild.... after I’ve spent a ton of money on other Jeep stuff that could have waited for this to...
Hey all,
It’s been a minute but I’m back after all kinds of home remodeling lol. So my 06 TJ with only 54k miles needs a rebuild :patadaenwevs:. Wow did I get taken on this Jeep!
I’ve got a good place in Highland, MI for the motor work I can’t do (machining etc.) but considering having a...
Well I thought I had my TJ dialed in but now have a new issue. Pulled into my girlfriends driveway a few weeks ago and she wouldn't start back up. This happened previously and when I changed the ignition switch the problem was solved. So I replace the one I put in and it still wouldn't start...
Kid free weekend = work on jeep. So far removed intake and exhaust manifold, down tube, oil pan, and rear main seal. Tomorrow will be 50% reassemble.
FYI if you don't already know depressure your A/C line before disconnecting.... was Mt. Saint Helen here a couple hours ago lol.
After some lengthy discussion with @Chris, and some digging about which way to go for exhaust manifolds; price vs quality and close to oem as possible for the 4.0 I came up with these parts.
Dorman Front and rear manifolds:
Dorman 674-467
Dorman 674-468
Fel-Pro manifold gasket:
MS93094
Walker...
So this weekend I'm going to replace my rear main seal and oil pan gasket per @Chris amazing writup on how too.
https://wranglertjforum.com/threads/rear-main-seal-replacement-4-0.826/
Since I have to remove my down tube and there is a tick coming from the manifold area I figured I'll replace...
I think the only option I have left to get rid of driveline vibration is a SS SYE. With a 4" lift and the Savvy under armor tummy tuck I am out of room for adjustments. I was looking at the JB, anyone had luck, no luck, etc. ?
so today I took on the task of cleaning my throttle body. As usual I have to take it to the next level. I pulled the butterfly valve and set screw that hold the plate open just enough for idle. Now I have no clue what the gap needs to be between the butterfly valve and the throttle body. I...
Has anyone lowered their trans with the Savvy tummy tuck skid and cross member? It's the only fix left possible to cure my drive shaft angle for vibes at higher speeds under a load.
I pulled my pcv and ccv valve from the off my valve cover today. I've been leaking a lot of oil so I'm starting simplest first. I noticed one is just an opening where as the other has a smaller hole inside (ccv). My friend keeps trying to tell me there's a check ball in there to regulate air...
I dropped my TJ off a couple weeks ago to have some work done. She's almost ready but man I'm fiending!
I know she's in good hands and I have to be patient :(:confused::eek:o_O:cool:. :eyepop::hollering::vomiton22je:
Has anyone purchased/installed headlights from lightwerkz out of Wixom, MI? My girlfriend purchased these LED's and the halos for Christmas and I know nothing of them other than they are Chines made.
The guy I purchased my tj from straight piped it and had the exhaust angling down in the middle/rear of the jeep which inturn melted the bushing on the passenger rear upper control arm .
So I decided to purchase and afternarket exhaust instead of going factory, and after a little research and...