Search results

Hey all, I’m not gonna use the rear seat and all seatbelts and brackets from my Jeep. If you’re in the Northeastern California, or Reno area and would like them, send me a PM and I’ll work something out with you. Sorry, no pictures right now. But here’s a picture of the front seat to show the...

IIRC, the rear pinion angle is good at 2 degrees angled downward. And the front was opposite, 2 degrees angled upwards? Or is it better to be closer to 0 degrees in front? And in the front, would that apply regardless of low pinion or high? Just wanna make sure I got this straight in my mind...

https://sacramento.craigslist.org/pts/d/redding-warn-m8000-jeep-winch-truck/7401161862.html Needs some work from what the seller says, seems like a good deal.

I was in Sparks visiting friends, talking about wheeling my Jeep when my friend asked me if I’d heard of Moonrocks. He showed me a couple YouTube videos about the place, and it looks interesting. Any of you ever wheeled there?

Hey guys, correct me if I’m wrong. Am I ok with disconnecting my front DS at the diff yoke, tying it up, and driving around? I need to isolate the rear DS from the front to check for vibration. I seem to remember that it’s ok to do, but I wanna make sure. Thanks! 😸

Hey everyone! I’ve got a drum brake Dana 44 and a low pinion Dana 30 for sale. Both are 3:73 ratio, and the 44’s an LS. Don’t know what year the 44 is, but the 30’s a 2002. Just pulled them out for an upgrade and they were working fine for me. I’ll throw in the 6 month old Power Stop Z36 towing...

Hey everyone! I’ve got a drum brake Dana 44 and a low pinion Dana 30 for sale. Both are 3:73 ratio, and the 44’s an LS. Don’t know what year the 44 is, but the 30’s a 2002. Just pulled them out for an upgrade and they were working fine for me. I’ll throw in the 6 month old Power Stop Z36 towing...

I need to replace the u joints in my front driveshaft, and I found out that the closest driveshaft repair shop to me does not use Spicer u joints, they use NEAPCO (New England auto parts company) brand. I’ve never heard of them before, but after web searching for reviews, I found they have a...

Hi all! 😸 Some of you know me from my posts, and some of the NorCal guy know me cuz we've met. And now that the formalities are out of the way, I'm finally gonna start a build thread. ('bout damn time!) And I've spent a little over a year on the forum askin all kinds of noob questions tryin to...

Are Dana 44 drum brake axles the same as Dana 44 disk brake axles? I want to put my Dutchman alloy axles from my Dana 44 drum brake rear end into my Rubicon Dana 44 disk rear end. To do that I’ll have to install new bearings and mounting plates, but I don’t want to do that if the axles aren’t...

Going to be installing axles in the HP 30 and I wanted to know about the oil slingers. Should I be using them, and if so, where exactly do they sit on the shaft? Noob question, I know, but I’m not pulling the stock axles to see where they sit, and I don’t know if they’re an important item.

Hey Guys and Gals! I need a little help. Could someone with a Rubi sent me a picture of where the locker pumps are mounted under the Jeep? I'm installing a Rubi Dana 44 and I have the stock bracket and pumps, but I don't know where they go. And since my rig is an '02, there's nothing under the...

With regard to a 2004 Rubicon Dana 44, are the axles anything special? Are they bigger or tougher, or alloy perhaps? I’m planning to put my Dutchman chrome-moly axles in my Rubi Dana 44 before I install it it my Jeep, but I was wondering if I was missing something about the axles that are in it stock.

Hey guys and gals! I’ve got a set of rear King shocks that I took off my 2002 Wrangler I’m looking to sell. I’m not sure of the model, OEM I believe. They don’t have an external adjustment knob, and I don’t know if they’ve been tuned or not. They were on the Jeep when I bought it and were way...

I found what looks like a hp dana 30 out of an MJ. Does anyone know if it's the same as an XJ hp 30, or is it different? I want to build an hp 30 for my tj off the vehicle to make a swap simpler. But I want to start with the correct axle. A little help?

So, to start, I'm looking to build a front axle for my '02, 4.0 TJ off the Jeep so I can keep driving it. I have a Rubi complete rear axle setup, and plan on setting the front up with 4:11's and a Eaton e-locker and beefier axles, and black magic brakes to basically finish my build. I'll be...

Just got my new soft shackle in the mail and I was wondering what the thread loop was coming out of the main loop, a release pull?

I've got a quote I'm mulling over from Folbeck 4X4 in Reno to do my gears, e-lockers and front axles. They're using Sierra gears and axles. Any experience with Sierra gears or axles? FWIW, their quote was $6900.00 out the door parts and labor. Front and rear diff's. Thoughts, opinions?

I'm looking for a shop to do my re-gear and locker install, and I found this place. https://www.folbeck.com/ By their own admission they have the best gear guy in the Reno/Sparks area. I'm having them work up an estimate, and I'll have more estimates from other shops before I choose, but I...

This is a radio/CD unit for the factory sub-woofer system. It’s out of my 2002 Wrangler. This is a refurbished unit from M&R electronics in Michigan. It works perfectly, I only swapped it out because I didn’t like the back lighting color. I paid $180.00 for it last April. I have the receipt if...