Search results

Those trailers are as wide as a Humvee, I'm not sure that it would work well behind a TJ. Sent from my SM-N920V using Tapatalk

Can that core freeze solid and stop air flow almost completely? Sent from my SM-N920V using Tapatalk

I did notice on the trip that if we stopped of for a long lunch or something, about an hour, the A.C. would start working again for a short amount of time. There was always a puddle of water from the condenser. What do you mean by it's fixed and there's nothing you can do about It? Sent from...

Sounds good, ill look into it and post any finds. Thanks for the help! Sent from my SM-N920V using Tapatalk

The fan works at all speeds.. at least I can hear it working in there. It seams like a bafold is closing on its own. And the little air I am getting out of the system is still cold. Sent from my SM-N920V using Tapatalk

My 97 TJ, 4.0, 5spd, sport with 210k miles on it is having an A.C. issue. We first noticed it on owr road trip through the Pacific NW. We would start driving and after 150-200 miles the amount of cold air blowing through the vents would drop by 90%. I can still hear the fan working at all the...

I'm not sure you can buy it, but with a lot of fab work you could create one like this. Sent from my SM-N920V using Tapatalk

What I picture when I see that grill.. Sent from my SM-N920V using Tapatalk

I personally have used the winch more times than I can count, with ARB lockers front and rear. It's an invaluable tool both on the trail and off. As far as the "high lift" I use a farmer's jack, and it's great when you have to change a tire and the jeep is twisted/stuck. That's my 2 cents...

Hey bobthetj03 I think you have seen my trailer before. And as far as the one of a kind I was referring to the sprung weight, unsprung weight and specific tires that i am currently running. And an update being the 20psi I started at with those tires was great on the dirt tracks but on the...

Again I thank you for the response. I am going on a 3 day trial run starting at 20 psi and will have to adjust from there to determine the optimal pressure seeing as "caveat emptor" this is a custom built trailer and the only one I know of of it's kind. Cheers! Sent from my SM-N920V using Tapatalk

Ya i forgot to mention that it was a vehicle tire. So the loaded weight of the trailer is 800#. Sent from my SM-N920V using Tapatalk

Thanks for the reply, I'm running Goodyear wrangler Kevlar MTR's on the trailer. 32x11.50R15 nonbeadlock. I was looking to see how low I should let them down to improve the ride. Sent from my SM-N920V using Tapatalk

What tire pressure is best for a trailer? I just recently bent my 2k lbs rockwell trailer axel and the guy I buy them from suggested that my tires might be to hard for the weight of my trailer (800#). I ended up with a 3500# rockwell axle to replace it and hopefully eliminate that problem...

What tire pressure is best for a trailer? I just recently bent my 2k lbs rockwell trailer axel and the guy I buy them from suggested that my tires might be to hard for the weight of my trailer (800#). I ended up with a 3500# rockwell axle to replace it and hopefully eliminate that problem...

I was thinking of this kind of wd40. And since penetrant isn't effective with disimilar metals using a torch with low heat (as to not melt the aluminum) is the best option. Sent from my SM-N920V using Tapatalk

Have you tried any type of penetrant? I would hit it with some pb or wd 40 penetrant, let it sit for a while and give it a go. After that maybe use a torch to slightly heat up the area around the bolt. And if all else fails there's always the Atlas 4... lol Sent from my SM-N920V using Tapatalk

Has the issue repeated after those two times? Sent from my SM-N920V using Tapatalk

I had a similar issue with my 98. My fuel pump sending unit had a small check valve at the bottom that was sealed shut. The jeep would run for a bit and die. Then after sitting some time the fuel would make it back into the sump and it would run again. If you are able to check you're fuel...

I got my 44's out of this salvage. The guy that bought it at auction only wanted the interior, doors and top. I picked it up from him for 2k and sold everything else almost breaking even.