Search results

Maybe I'm just trying to get too fancy by changing brands/etc.. and I should just get a new set of the Duratracs haha. They have been good to me, just need a new set because the current set is definitely past due given how old they are. Also I think they're close to 6lbs lighter per tire than...

Location: Denver(ish), CO Driving: Mostly around town, highway driving into the mountains + occasional light offroading. Notably the TJ fills in as a winter use vehicle when I don't want to take out my VW GTI Current Tire: 31X10.5 15s Wrangler Duratrac (Old and need to be replaced) Current...

You could look into Penetrol - quite a few people have posted about it on this forum and had good results with it on their hard tops. I actually just applied some on my tan hardtop and it looks much better after a light coat

To close out my own thread (🙃) and for anyone who may experience this in the future. Sure enough it was the throttle cable being out of alignment because the linkage bracket still had the spacers from the PO's throttle body spacer kit. As soon as I removed the spacers I am back to idling right...

Oh man - I'm 99% positive I found my issue. I started playing with the throttle cable and if I force it as "low" as it can go (aka no throttle) the Jeep idles down to where it should be. Started looking at why that could be and realized there's more parts to this stupid throttle body spacer kit...

I suppose one course of action is to take the IAC valve off and give it a good cleaning by hand :unsure:. Could it also be something to do with the new gasket because I did not have the issue since ownership until I removed the throttle body to take off the spacer.

PO had installed a throttle body spacer that I removed and while removing it I also put in a new throttle body gasket from Autozone. After ~50 miles of driving I had the CEL come on and it was a P1294. I checked that all the bolts on the throttle body were tight and also sprayed some throttle...

@Jerry Bransford coming through as always - went down and got a replacement ignition coil and she started right up. Probably didn't need a new crankshaft position sensor but at least I know I have a new MOPAR one on there and won't have to worry about that for awhile :)

Background - Wife was driving the Jeep and as she was slowing down it started stuttering, then died and she had to pull it over - Wouldn't start back up and it just cranks What I've done so far - Verified fuel pump kicks on - Did the starter fluid test by spraying some into the intake and still...

Huge shoutout to @kalmairn for letting me swing by to compare, I guess it goes to show it's hard to compare the expected feel of a 99 Jeep manual to a 21 GTI manual 😅.

Yeah I think I'm gonna reach out to one guy who lives out here to see if I can compare and contrast. It's hard to know what should feel "right" when going from a 21 GTI manual to a 99 TJ manual as they are a completely different type of vehicle. Yeah that's what I want to do but of course...

Would you leave it alone even if they've resurfaced it? It seems like no matter what I'm going to end up having to take a look at the clutch assembly to try and figure out the root cause 🤔. Who knows if it's something else all together causing the issues with it feeling like it's sticking.

Looks like I have a fun weekend project ahead of me :). I wonder if I should just buy one of the aftermarket transfer case cable shifter kits while I already have the trans dropped and I'm already down there

Yeah that's the crazy thing, they charged the PO $68 for the resurface and the replacement is $77 https://www.amazon.com/dp/B003K0XO64/?tag=wranglerorg-20

Haha thanks, I blame it being a Monday and why I'm slower than usual :sleep:

Or, could any of this be attributed to the Jeep being lifted without a TC drop or a SYE and new driveshaft? I plan to drop the transfer case for now just to help with the slight vibrations and maybe that help resolve this issue 🤷‍♂️

Yeah I've seen you comment on quite a few other threads about this haha, do you think the flywheel being resurfaced is the root cause for some of my issues? I think the first thing I'm trying to diagnose is the clutch pedal feeling like it's getting sticky at the top of it's release and nowhere...

So the PO had the clutch replaced at a shop and it looks like they used the LUK clutch kit (https://www.rockauto.com/en/moreinfo.php?pk=4695855&jsn=3) as well as a MOPAR clutch release fork spring (https://www.amazon.com/dp/B007NMFHEW/?tag=wranglerorg-20). The clutch pedal is easy enough to...

Took the Jeep into the mountains yesterday and noticed a whining noise above 3k RPMs. It is easily reproduced sitting in my driveway in neutral and revving the engine up past 3k RPMs. Unsure when the serpentine belt or any pulleys have been replaced as the Jeep is still new to me. From a glance...

Yeah, putting 85 into it would definitely do that. I tell all of my friends that visit Colorado to not just press the left most button at the fuel pump when fueling up because it's 85 and not what you want to be running because your engine is not carbureted. Glad you made it home okay!