Search results

  1. Sean Allen

    Anyone have a B&M Short throw shifter (#45195)?

    @k-huevo did you notice that the B&M is a considerably shorter throw? I bought the shift lever for my NSG370 but cant install it with my tuffy consol. Unless I don't want to use 2nd, 4th, 6th or Reverse :LOL:
  2. Sean Allen

    Can't get new 4.0 engine to start

    Did you make sure you put the engine ground strap back?
  3. Sean Allen

    Isolator for Safety Thimble 2

    Well that’s a load off! And prior to you dropping that knowledge bomb on me I figured $6 was cheap insurance. 🤷🏻‍♂️
  4. Sean Allen

    Isolator for Safety Thimble 2

    Prevents metal to metal contact that could potentially cause a burr that would damage the line. But I’m guessing you knew that already so let’s hear why you think it’s pointless
  5. Sean Allen

    Isolator for Safety Thimble 2

    Recently installed my Safety Thimble from TRE. Just thought I’d let you guys know that if you’re not running their fairlead that keeps the thimble up out of the way and you’re looking for an isolator between your fairlead and thimble the one from Viking Off-road fits the TRE thimble perfectly. I...
  6. Sean Allen

    My BMW was leaking like a sieve

    @Jerry Bransford you mean you don’t have this tool? 🤣
  7. Sean Allen

    Mopar water pump alternatives?

    Anybody have experience with FlowKooler? It has to be better, right? Because, you know. Billet!
  8. Sean Allen

    Georgia Georgia Jeep owners check in!

    Welcome! I saw this on CL a while back. Unlimited Rubicons in Khaki are the best Jeeps. LOL
  9. Sean Allen

    Spare tire rattle with MORryde / Exogate?

    Thanks @nk24! Guess I’ll start checking the junk yards
  10. Sean Allen

    Spare tire rattle with MORryde / Exogate?

    Just got my exogate in the mail, getting ready to install. My issue is I'm replacing the swing away bumper that the PO installed so I don't have the original tire mount. Im running 35" tires on 15" wheels with 3.75" backspacing. Is finding the original TJ carrier my best bet? Or does anyone make...
  11. Sean Allen

    Winch find - Sherpa Mustang

    I ran into a similar situation recently while looking at buying a new gas BBQ grill since mine was 10 years old and getting rusty. I started looking at the Weber Genesis line (its their middle of the road offering). I was shocked to find they were running around the $900 mark and even more...
  12. Sean Allen

    Does anybody else hate Bedliner?

    What it comes down to is not all bed liner is created equal. There’s a huge difference between the roll on shit you get in a can and the patented formula you get from Line-X or Rhino. There’s also the massive amount of prep that goes into it that most DIYer’s will cut corners on or just not have...
  13. Sean Allen

    LED vs Halogen Headlight

    I run the KC gravity LED headlights now and am very impressed. I Upgraded them from the KC halogens because the light color was different from the gravity LED spotlights I have and I’m weird enough to let that bother me! 🤣
  14. Sean Allen

    LED vs Halogen Headlight

    That was HID not LED. LED has no ballast
  15. Sean Allen

    Fitting 35s on a 4 inch lift

    Also upgrading the stock axles is probably a good idea with 35s. As well as Currie Correctlync steering!
  16. Sean Allen

    edelbrock head

    I figured I end up just using a pre-2000 header/downpipe and deleting the CATs and rear O2s with HPTuners.
  17. Sean Allen

    edelbrock head

    Did you ever find out? I had emailed edlebrock a while back when I was looking at this head. They said it was a banks header they used for testing. But never confirmed whether it was the late or early style.
  18. Sean Allen

    Any suggestions on a name for my Jeep?

    Don't worry about the drive. Good 'ol Trailer Park Karen will treat you right!
  19. Sean Allen

    Anyone have a B&M Short throw shifter (#45195)?

    That's good to know. From what Ive read, there's still no fix or upgrade to the poorly designed shift cradle. Did he say anything would be upgraded? Or are you just starting over fresh with the same inherent issues?