Search results

Not mine but looks like it could be a great deal for someone. https://seattle.craigslist.org/sno/pts/7574104273.html

I'm flying in this weekend to look at a used Patriot Camper. https://www.patriotcampers.com.au/off-road-camper-trailers/x1/ If the sale goes through, my plan is to ask the owner to drop it off at a nearby Boat & RV Storage Lot and then I'll drive down in the spring to tow it back up to Canada...

I replaced my original clockspring about a year ago with a brand new Mopar and this week I started getting an intermittent airbag light when turning the wheel. Sure enough, I checked it with a voltmeter and confirmed the clockspring failed. I'll replace it with a Dorman under warranty but...

Anyone parting out a Rubicon? I'm looking for the 8 pin harness plug that goes into the back of the dash locker switch. I don't need the switch, just the plug with enough wire that I can splice to.

In preparation to replace my valve cover gasket I had to remove the black plastic bridge that supports the wiring loom. There are lots of posts with some instructions (including just to break it off) but I never came across any good close up pics or detailed instructions. So here you go. The...

So this isn’t my Jeep, it is my buddy’s. He is running Edelbrock heads with a performance cam. He replaced the factory OPDA with the Crown one less than 5,000km ago. Last week he loses oil pressure and gets a bunch of check engine lights. Shop digs in to it and says the Crown OPDA is totally...

I was looking for a Bike and Ski rack for my Jeep that didn't require me to put on a trailer hitch. I wanted something that I could easily mount to my spare tire and take off when not in use. I considered both the Yakima and Thule options but didn't like the way it the ski carriers looked...

So my wife has been complaining about the difficulty getting the kids into the back seat so it was time to take on this project. I took a chance purchasing a Rugged Ridge Tumble Bracket but unfortunately it doesn't bolt right in with the PRP adapters. It is suppose to bolt into the rear...

So i had a bad day putting my hardtop on. Anyone ever sourced these clips before? These are what aligns the hardtop to the tub.

So yesterday I found someone’s brake liner in the middle of my streeet. Today I realized it was my own! Pulling my 8000lb camping trailer tomorrow through the mountains so pretty happy this happened today. I heard some grinding and pulled the wheel. The liner on the front and back separated...

I purchased a leather wrapped Jeep WJ steering wheel which had audio controls that I wanted to get working. Unfortunately the TJ clock spring only has 1 wire for the cruise control signals and the WJ clock spring is not compatible in the TJ. I learned a lot about how this system works so I...

After watching @Daz7 YouTube video I went ahead and purchased a new leather wrapped steering wheel from ebay seller aacars14. He takes WJ wheels and refinished them in leather based on your selection. I choose silver stitching, perforated leather on the grips and plain leather on the top and...

actiontrucks.com seems to be clearancing their TJ bedtred products. I just purchased their last front liner set for $100 CAD shipping included. It goes for $300 everywhere else. They have rear liner sets (BTTJ97R) on for $183 CAD free shipping which goes for closer to $300 on other sites...

As part of my York install, my alternator had to be relocated. My alternator cable is now about 6" to short - even after trying to get slack from the harness. What would be the proper way to lengthen? Should I just cut the terminal off, butt connect a new length and adhesive heatshrink it...

Pretty dumb move on my part! I had trim my exhaust pretty far back under my tub to install my tummy tuck but I was holding off on getting the exhaust done until I got my new gas tank skid installed. I guess i put a few too many miles on it with trimmed exhaust. I just noticed this when...

I pulled my coils last night as part of my SYE install. I had about a half inch of sag on the passenger side. Here’s an interesting pic of the springs which are only a little over a year old and haven’t seen much off-road use. I swapped sides so that may fix my issue.

So I blew a u-joint on my front driveshaft and unfortunately didn't notice it until I got off the trail. It looks like it was banging the yoke pretty bad and took some metal off. Does this look like the yoke needs to be replaced? If so, how hard of a job is it to do myself?

Interesting for someone with a rusted out LJ. Jeep LJ 04 to 06 frame with 4.0 engine, 6 speed trans, air conditioning, steering column, shifter, 3” lift, Ranch adjustable shocks, 4 wheels disc brakes, Dana 44 rear end with posi, computer, wiring harness and NO rust, or wrecks. Call 541-six zero...

Interesting ad I came across. I kind of like the Gladiator look it gives. https://seattle.craigslist.org/tac/pts/d/vaughn-jeep-lj-custom-cage/6962720639.html

So I figured out why my AMP PowerSteps weren't working on my RAM. This is what it looks like after 50,000 km. They made no effort to make the plastic gear cover dirt or waterproof.