Made this from a Wavian water can spout mainly to make it easier to fill a generator, chain saw, etc.
Its simple as well to use when filling a vehicle. The tube fits an unleaded fuel opening
If you go this route remember to change the gasket to the fuel rated version.
3+ years ago I replaced the two (2) bulb florescent fixtures that came with my garage.
I went we these fixtures after several bad experiences with HD fixtures.
https://www.primelights.com/products/the-bolt-2-lamp-led-shop-light-5700lumens-pl-blt44wcl
At the time these fixtures were less than...
80/20 is some cool stuff!
We used it occasionally at work to fabricate custom guards when life testing parts.
I saved what ever pieces I could if something was scrapped.
If peg board isn’t for you, look at the panels @Mike_H uses in his above post #51.
I’ve seen these panels on a site...
@Rcroane An idea for next time.
As you use your die grinder in the future save the cut off disks as they wear down to various smaller sizes.
Even a disk as small as a quarter could be useful in a really tight spot.
A few of mine shown with a full sized disk and a quarter. (I need a few...
Pegboard works great to store bulky items that would take up a lot of room in drawers or cabinets.
This wall is an arms reach from my table saw.
It holds jigs, fixtures, etc. for the table saw, band saw, and drill press among other things.
Made a bunch of dividers for my drawers when I worked in a Dept. with a nice brake and shear.
Really helped keep things in place when I moved my box with a fork lift. Especially outdoors.
My metric wrench drawer
Pry bars, large files, adjustable wrenches etc.
I’d like to try that tool!
If you have experience with a pneumatic 1” impact wrench, what air pressure did you use to run it?
My only experience with a 1” drive wrench was the unit we had at work for doing the old Chrysler, screw in, ball joints.
That gun would not do the job on many ball...
I’ve used these for heavy items for the last 20+ years. Never broke one, never had one come loose.
https://www.leevalley.com/en-us/shop/hardware/hooks/tool/50353-talon-hook-sets?item=93K0128
Dont need or use them for everything but they do work well.
Ive seen them sold other places but don’t...
Fantastic trailer! My OCD self is in love with it.
I have no experience setting up a job site trailer but can appreciate your organization as I try many of the same ideas in my small, multipurpose work space.
And I thought your original gorilla ladder outfeed work support was pretty slick.
This is mine made from a Harbor Freight hitch rack
https://wranglertjforum.com/threads/custom-cargo-basket-storage.8648/
@Mr. Bills welded rack is pretty sweet as well.
Yup. Owners manual was written before the switch.
Thats what the above test I posted about was designed to address.
ATF+4 is a superior fluid in my experience and you will have NO issue replacing the originally spec’d fluid with ATF+4
That being said, run whatever makes you comfortable
You will not have a problem mixing Mopar Power Steering fluid and ATF+4
Here my post from a few years back on that very subject.
In my experience you will be perfectly fine with ATF+4.
This is the experience I base this statement on.
I was working at Chrysler’s Desert Proving Grounds when...