caster

I have an 01 Jeep Wrangler with a 2” lift sitting on 32 MT tires. I feel it pull to the left/right driving highway speeds or driving over any bumps/cracks on the roads will make it swing either to the left or right. Les Schwab said its fine but i don’t believe them. You gotta white knuckle it...

Ok so here is the deal. I bought this tj about 8 month ago and like and last weekend I decided to fix a leak that I had right on the SYE case. This jeep has a 3” or 4” lift Im not really sure, so it had a sye installed. So after I open everything up I found out that the oil pump was cracked so I...

Background: 2004 LJ, The lift is a 2” DPG Offroad TJ Super Ultimate Lift, contains the following: -JKS Control J-Flex Adjustable Control Arms (All) -Old Man Emu Springs -Old Man Emu Shocks -Old Man Emu Steering Stabilizer -JKS Quick Sway Bar Disconnects -JKS Front and Rear Adjustable track Bars...

I just had an alignment and my caster angle was measured at 4 degrees, is this a problem?

After my suspension install the steering wheel returns to center just fine, and aside from my vibration (yet to be identified) the Jeep drives perfect. I was measuring my caster angles today just to check, and the drivers side is 9 degrees, while the passenger side is 6 degrees. I measured them...

I know how to adjust the caster with my new control arms. What I am trying to figure out though is the process for doing so. I'm assuming that the vehicle needs to be completely flat on the ground in order to measure the caster angle and pinion angle, yes? So, let's say I install these...