drag link

Maybe this applies to more JKs than TJs, but for crossover steering setups, what measurements matter in regards to the location where the drag link mounts to the knuckle? I know the distance between the mounting point and the steering inclination axis will affect the steering rate, but what...

Hey Jeepers. 2005 Rubicon TJ, Auto w/ 152k. Here is my issue: Lately I've been feeling a loud clunk when turning namely left. Well it's more of a snap feeling and sound. So. The other day I was driving home and the "rear lock" light began flashing on the dash. I pulled over and this stopped...

Is this pitman arm angle correct? My thought is that it should be parallel with the body of the Jeep but I have no idea really. I’m trying to track down the cause of my steering stabilizer rubbing against my track bar. Not sure if this is related at all. Please let me know of any issues you...

Please help! Hi everyone! I just bought the Jeep about 2 and a half weeks ago, after thinking about one for years. I absolutely love it, it only has 73k miles, no body rust, and an unreal solid frame for the north east (which I just POR15'd after lots of thread reading!)... However, it needs...

Hey everyone! First post here. I just bought this Jeep and it has the teraflex steering upgrade on it. The problem I have is the sway bar bracket on the axle comes in contact with my drag link. Has anyone run into a similar issue like this and what can I do to fix this issue. I want to be able...

I have an OEM tie rod and drag link. The rubber cups for the grease are cracking. They’ve never been run dry. I replaced the parts with Currie. Does anyone want these old parts? I don’t want to ship. I’m in Palmdale, CA real close to the 14 fwy.

I recently got my TJ diagnosed after experiencing the inevitable death wobble. It felt like my jeep was shaking apart when going over 25. I was told it was the left side that was loose. They said I needed to replace the Center Link, Drag Link, Outer Tie Rod and Upper and Lower Ball Joints. I...

Ok while putting the front end back together after doing the u joints and ball joints I went to attach my drag link and the stud was turning with the nut. Soo I needed to replace the drag link.. what I discovered was the PO installed a beefier one than stock and that meant I needed a new...

After searching online for a definitive answer on dropped pitman arms with the Currie Currectlync I’m more confused than when I started. I know that the track bar and drag link should be parallel to get rid of bumpsteer but with my current set up I don’t get any bumpsteer at all. Unfortunately...

When I bought my 05 Sport, it had some deferred maintenance issues that the PO had ignored. One issue is that the ride was harsh and jittery, nothing like you'd expect from the relatively new RS9000X shocks the PO had installed. With some help from some really knowledgeable people on this...

When a V8 ZJ tie rodis substituted for the flimsy TJ tie rod, is it important to use a ZJ drag link also? Since they are both solid rather than a hollow tube, seems to me like the ZJ drag linkwould not necessarily be a significant upgrade over the TJ one. Am I missing anything here, or can I...