sensor

Hey guys, ive diagnosed my engine light and its coming up with error cod P0133 which has to do with the oxygen sensor. does anyone here know how to fix the issue and diagnose whats actually causing the light to come on?

So having a hard time figuring out what to do. Donor 99 durango ccd 5.9 motor and trans. Into a 2004 pci Tj I have access to an entire 99 ccd Tj for wiring. I mean everything. (Gutting for a simple buggy refresh.) Question is. What to do about swap wiring. Do I use the entire Durango...

i have a 1999 SE 4 litre. my dash is throwing me a P0118 iv read online people saying there is only one coolant sensor but others say some older models can have two of these sensors? can anyone tell me if this is true? and is there a part number for this sensor from a reliable retailer online...

On the Rockauto website there is a part number for the crankshaft position sensor spacer but when I look in the parts manual for a 98 Wrangler I don't see one. Some website say the 98 doesn't need the spacer some do. Anyone with a 97/98 Wrangler change the sensor and did you use a spacer? Thanks

Hello, so I have been having some issues with my jeep. It usually waits till it’s heated up. It will hesitate and jerk kinda bad, and oddly enough seems like it really does it when I got over bumps in the road. The RMPs don’t drop but the speed does? But I’m not slowing down that much. Like it...

New Jeep owner, have a 2000 TJ and I recently had a new clutch put in. Afterwards, noticed the speedometer was no longer working. Thinking it was mechanical and they simply forgot to screw it back again, I put it off for a while. Later, when taking it in for some electrical issues, I asked them...

I have a 2005 Rocky Mountain Edition with a 4.0L & 6spd. I've been getting P0016 and p0344. I changed the camshaft sensor twice now I had trouble initially getting a mopar sensor but i have a new mopar one in there now and still getting the codes. The p0344 only activates if its cool outside or...

Hello guys, I believe this is a dumb question but I dont find wath I want in any other place. I have a 2004 jeep Wrangler X, it was made on July 2004, so it has all the components of the 2005 ,for example the new intake and computer etc, I had some issues with the 42rle (I know, we all have)...

Hey all. I’m banging my head against the wall. 2006 4.0, just had motor rebuilt, rv cam, .0003 over. Initial drive after getting her back together and check engine light is on and sputters at 2500 rpm. Code calls for camshaft positioning sensor (which is brand new Dorman that came with OPDA)...

There are several reason why you would need to replace your Jeep TJ Wrangler's Crankshaft Position Sensor (or CPS for short) with the most obvious one being that your 'check engine' light has illuminated and a quick check with an OBDII reader indicates you have thrown one of the following MIL...

Edit for anyone who has this problem in the future: I went out to my Jeep, turned it on, put my arm through the window and turned the steering back and forth enough to stress the system just a bit, until I could tell the RPM's kicked up. Sure enough, a little drop of fluid came out around the...

Has anyone used Seafoam spray in their Jeep? I know it says that you should never spray it in front of the MAS but since that is on the throttle body I'm curious if there is a way around that? Any thoughts? Thanks.