track bar bracket

  1. Slicknick630

    Is my pitman arm and track bar too close?

    Ok so I just installed a new track bar and track bar bracket in the Jeep. I have a teraflex high steer setup and a rough country drop pitman arm. I am not trying to get into a debate about having a drop pitman or not or what you think about RE track bars and there brackets or any other brands. I...
  2. greyghost_lj

    Upper Track Bar Hole Too Big

    So I've got to replace my bent trackbar. I ordered a JKS OGS125 Adjustable Track Bar. Problem is I forgot I had to drill out the frame side upper track bar hole to 5/8 for the bent track bar and the new one has a 9/16 bolt. Is there some kind of bracket I can get to adapt this? I've seen...
  3. EZ_Wrangler

    Where do I buy tapered sleeve for frame side track bar?

    Frame side mount is wallowed out. Need a tapered sleeve for a temporary fix. Any ideas?
  4. TrueChar

    Removing Pitman Arm and Reducing Wander

    Good Evening, I purchased my first TJ a couple weeks ago, and it has an annoying amount of steering wander at 50 plus. I had some work done to it to try and resolve this, and it's a little better but still very uncomfortable over 50. Recently done: -Tie Rod Ends (Inner and Outer) -Ball...
  5. JTJ1999

    Is this track bar relocation mount okay?

    So as I was reading through some topics trackbar relocation brackets seem to be a hot issue among some. I was looking at mine because I knew it had one and I just wondered if there was anything wrong with having it as it moves the track bar further forward to clear the diff better as far as I...
  6. afitzray97

    SOLD Currie Track Bar Relocation Bracket

    Relocation Bracket as pictured. Requires welding the tabs at the bottom where they fit against axle shaft housing. Only mounted for a few days but never welded and then I went with a JKS kit because I had to order the bar and bracket sold together. Measurement shown for the track bar mount...
  7. jazngab

    SOLD OME rear track bar relocation bracket

    FS brand new OME rear track bar relocation bracket. Never used. Was going to use with my 2” lift but ended up using the JKS angled bracket to go along with a SYE. $25 shipped
  8. Punisher

    Front track bar relocation bracket

    Installed an Iron Rock Offroad 4" lift kit. Came with a front track bar relocation bracket. Instead with supplied bolts but few this is causing death wobble. Was considering welding the bracket instead of the bolts. Thoughts?
  9. Chris

    Currie Track Bar Relocation Bracket Question

    I'm running this with my Currie 4" lift: http://www.currieenterprises.com/cestore/Product.aspx?id=3796 My question is, can the lower portion of it (the part that's supposed to be welded to the axle tube) be welded on while the axle is still in the tube and everything? I'm asking because I don't...