2.5 inch lift

[Zjones]

I’m looking at doing a 2.5 inch lift. Besides springs and shocks, does anything else need replaced / any other modifications I need to do for this lift?

 

[DavidBT]

I did the RC Springs 2.5" lift and added the RC? Rear track bar relocation bracket. I should say the mechanic did. I also bought hockey pucks for bump stops. Basically used @CodaMan's lift post. Also went with the Rancho 5000X shocks and it all works for me.

 

[Duck Doctor]

Consider installing an adjustable front trackbar instead of retaining the OEM trackbar.

 

[CreepinDeth]

Everyone says ya wont need adjustable control arms when doing just a 2.5” lift. However, when I added my 2.5” Rancho lift, I just put in some Rubicon Express adj UCAs anyway

Today while under the Jeep pulling my 02 sensors out I looked at my UCA swivel joint and man I tell ya, if that wasnt a swivel joint, it would be a pretty twisted angle

I should have taken a snapshot

 

[Yeti08]

rear trackbar relocation bracket.

 

[TheBoogieman]

Longer sway bar end links and a t-case drop or MML.
p.s. There's a lot more options for 2" and 3" lift springs.