a/c on the fritz. Compressor kicks on and off. Air gets cool but not cold. Recharged it with a DIY kit.
Sits at ~60 psi when the compressor is off, drops to around 45 psi when the compressor comes on (readings based on gauge that came with the recharge kit). a/c lines get nice and cold to the touch, but no cold air in the cab. The refrigerant is in there, but it no worky.
Before I recharged it, it would only get cold when I had it on the "re-circulate" air setting (as opposed to the drawing-in-outside-air setting)...
Also, prior to recharging it, the refrigerant was completely discharged as I had disconnected the a/c lines while working on another project.
Any suggestions which way to chase this problem?
Sits at ~60 psi when the compressor is off, drops to around 45 psi when the compressor comes on (readings based on gauge that came with the recharge kit). a/c lines get nice and cold to the touch, but no cold air in the cab. The refrigerant is in there, but it no worky.
Before I recharged it, it would only get cold when I had it on the "re-circulate" air setting (as opposed to the drawing-in-outside-air setting)...
Also, prior to recharging it, the refrigerant was completely discharged as I had disconnected the a/c lines while working on another project.
Any suggestions which way to chase this problem?