Anyone interested in custom machined axle brake line tabs?

[Fouledplugs]

Machined weldable tabs for 3/16 hard lines, drilled and tapped.

*Cost will be updated when the machine shop gets back to my supplier.

Could have a batch going through the machine shop in the next few days.

Looking at ordering 100, 200, or 300 pieces. With the higher probability being 100 pieces.

 

[mrblaine]

Machined weldable tabs for 3/16 hard lines, drilled and tapped.

*Cost will be updated when the machine shop gets back to my supplier.

Could have a batch going through the machine shop in the next few days.

Looking at ordering 100, 200, or 300 pieces. With the higher probability being 100 pieces.

View attachment 215776View attachment 215777

Yes, I'll take a 100 if they are around 4.50ish. I don't need them with hardware and I don't want the top plate countersunk like the lower one is and especially if they only do one.

 

[Fouledplugs]

I don't want the top plate countersunk like the lower one is and especially if they only do one

Are you saying that it looks like the hardware is countersunk in the lower pic?

 

[toximus]

I'd be interested in 10.

Edit: I'm only interested in hardware if it's 316 phillips.

 

[mrblaine]

Are you saying that it looks like the hardware is countersunk in the lower pic?

It is just the angle of the pic making it look like a countersunk Phillips.

 

[taylormade73]

I'd be interested in 10

 

[B00mb00m]

Ooooh those are nice!!

 

[Chris]

How many do I need, 10? If so, count me in.

 

[Fouledplugs]

How many do I need, 10? If so, count me in.

As many as you need or as many as your OCD calls for.

They can also be used along the frame for a clean look.

 

[toximus]

Would you consider making these in a larger size? I'd like a set for holding my parking brake cables (no tension just to keep them orderly).

 

[Chris]

As many as you need or as many as your OCD calls for.

They can also be used along the frame for a clean look.

I suppose it depends what they cost then. Any idea?

 

[Apparition]

I’d buy 10 if I can get them buy February and price depending.

 

[HornedToad]

I will buy 12 if you go through with making them

 

[Fouledplugs]

I suppose it depends what they cost then. Any idea?

I should be able to follow up by the end of the week with prices.

 

[Chris]

I should be able to follow up by the end of the week with prices.

Cool, I look forward to it!

 

[Wildman]

I'd be interested in 15-20 of them. Dependent on price of course.

 

[Fouledplugs]

I was hopeful for an update from the machine shop last week. Working this week.

More to come as soon as possible.

 

[fixmysix]

I'd be in for a dozen or so based on price.

 

[flyinfish]

I'd take at least a dozen if the price is right.
Thanks Fouledplugs

 

[Fouledplugs]

Machine shop is swamped. Supplier will work to get the drawings to another machinist.

As of current, the possible lead time: 2-3 months.