Anyone Running 33" Pizza Cutters?

Hi guys....anyone running narrow 33" tires? I'm planning on 15x8" wheels with 3.75" backspacing. I'm looking at 33's but don't really need the 12.5" width. Anyone running 33x10.5's or the metric equivalent? If so, which ones?
I have bfg 33x10.5 ko2.

Less weight and less tendacy to hydroplane.

20211211_073151.jpg


20211211_073128.jpg
 
Last edited:
Thanks guys....I'm also open to a 16 or 17" wheel but I'd like to keep the tires in the C load range.

I just purchased a set of Goodyear Wrangler Duratrac tires to go on my 16x8 Moab (Rubicon) wheels in size 265 75R 16, which is the equivalent of a 32" tall tire and about 10.5" wide. They are load C and fit flush to my Rubicon flares. This is the largest tire you can fit between the stock tire carrier and stock rear bumper without a body lift.
 
Last edited:
  • Like
Reactions: SvtLdr
I've been running 33x10.5R15 K02 for several years , 18K miles and have been very happy with that setup (3.75" BS).

However, I just converted to locking hubs and a 5x5.5 lug pattern so my 18K mile K02 tires on Pro-Comp wheels are currently for sale. See post #34.
 
  • Like
Reactions: SvtLdr
33 x 10.5 Genral Grabber X3 on ravines. I love the look of the tire with the lettering on the sidewall and have no complaints on the performance of the tire. They are a little heavy fwiw.
0XL0QFO.jpg
 
Hi guys....anyone running narrow 33" tires? I'm planning on 15x8" wheels with 3.75" backspacing. I'm looking at 33's but don't really need the 12.5" width. Anyone running 33x10.5's or the metric equivalent? If so, which ones?
Been running 33 x 10.5 x 15 BFG KM2 for several years on my '99 XJ. A bit noisy but a good tire.

917ec4456cf2b0253e07621fcda28f54.jpg
 
33 x 10.5 KO2s with a 4" lift. 15 x 3.75. All installed by the PO. Original 3.07 gearing...going Super 30/35...locker is backordered 2 months. Here's some YouTube videos if you want to see them in deep snow on logging roads.