Changed rear axle from Dana 35 to 44

[luisguevara2303]

Installed a rear axle

I installed a Dana 44 in replacement of my Dana 35

It’s has 5.10 gear with an ox locker. After installing I am hearing vibrations only after 3rd gear and only when I’m on the gas when in neutral nothing.

I do have adjustable control arms and an angle finder these are my angles at the moment

Diff 18

Driveshaft 15.7

Transfer 6.4

I checked u joints all are in good condition. Also changed transmission fluid with redline mt-90, Changed diff fluis with 75-140

Any help?

Removed my front driveshaft as my front is different gear ratio just to play it safe.

 

[speeding_infraction]

Not sure if this webpage would be of help, drive line setup is something I need to learn a lot about.
https://4xshaft.com/blogs/general-t...0sCB2Pi70xQgyDI81GCnir_5aN0Dg_4gHqF5KTy56RpT6
Subbed for more info

 

[JMT]

Installed a rear axle

I installed a Dana 44 in replacement of my Dana 35

It’s has 5.10 gear with an ox locker. After installing I am hearing vibrations only after 3rd gear and only when I’m on the gas when in neutral nothing.

I do have adjustable control arms and an angle finder these are my angles at the moment

Diff 18

Driveshaft 15.7

Transfer 6.4

I checked u joints all are in good condition. Also changed transmission fluid with redline mt-90, Changed diff fluis with 75-140

Any help?

Removed my front driveshaft as my front is different gear ratio just to play it safe.

You need to measure your pinion angle and driveshaft angle. To start, the pinion angle should be set 1* lower than the driveshaft angle.

 

[TheBoogieman]

It’s has 5.10 gear

 

[John Cooper]

Easily confused with the outdated 4.10 gear.

 

[luisguevara2303]

No way first person to catch that lol it has 5.13

 

[luisguevara2303]

Not sure if this webpage would be of help, drive line setup is something I need to learn a lot about.
https://4xshaft.com/blogs/general-t...0sCB2Pi70xQgyDI81GCnir_5aN0Dg_4gHqF5KTy56RpT6
Subbed for more info

I watched the video last night it definitely helped with understanding it thank you