Currie Track Bar Relocation Bracket Question

[Chris]

I'm running this with my Currie 4" lift:
http://www.currieenterprises.com/cestore/Product.aspx?id=3796

My question is, can the lower portion of it (the part that's supposed to be welded to the axle tube) be welded on while the axle is still in the tube and everything? I'm asking because I don't want to risk warping the axle or anything.

 

[Jerry Bransford]

Weld away. The axle will sink the heat away and not hurt anything. Just attach the ground connection adjacent to where you're welding and it'll be fine.

 

[Chris]

Weld away. The axle will sink the heat away and not hurt anything. Just attach the ground connection adjacent to where you're welding and it'll be fine.

Thanks! I was hoping this would be the case. Just don't want to mess up my axle or anything. At least until I get those Currie high pinion 44 axles

 

[Jerry Bransford]

What kind of a welder do you have Chris?

 

[Chris]

What kind of a welder do you have Chris?

I don't have one. I was going to have a local Jeep guy (David Kishpaugh, aka MUDB8) weld it up for me.

 

[Jerry Bransford]

Mudb8's a good guy, please tell him I
said hello. He has saved me a couple times with parts for my Rubicon lockers.

 

[Chris]

Mudb8's a good guy, please tell him I
said hello. He has saved me a couple times with parts for my Rubicon lockers.

Awesome guy, one of the very few guys I trust for good and solid advice. Nice to have a guy like that local to me as well. I'll be sure to tell him you said hello.