Ford Dana 44 Front Housing - $250 OBO

Status
Not open for further replies.

Fouledplugs

TJ Guru
Supporting Member
Joined
Jun 19, 2017
Messages
7,049
Location
Alabama/North Carolina
Bought this Ford (driver side drop) Dana 44 front housing with the idea of pressing in new tubes, new inner C’s, and using TJ outer guts to have a front Dana 44 to match my rear.

However, this housing has a leaf spring (spring under) provision cast into the housing. So its a no-go for me and the TJ.

$250 OBO, money talks. Located in Birmingham, Alabama, local pickup only.

Can deliver to Georgia or South Carolina for gas money.
912069BD-6E58-4A96-AB40-14CFF3DF0CFF.jpeg
79F978B2-2DA3-46C8-AF38-B5C4BDA3EC64.jpeg
CA90BAEF-E1CE-4C74-BA70-EACFDAD4822D.jpeg
722934B9-40D2-418D-83E3-A485A06CF4A3.jpeg
CBCB8B2B-C2CE-4CE9-9D5D-99C68FB85135.jpeg
 
I actually have the same housing and am going to use it on my LJ. It will be narrowed down from the 67 WMS to 60 and I will marry it to a rodeo rear. I have a similar setup in my YJ, so I have the brakes figured out. Now I just need to figure out mounts for the LJ. These HP housings are a keeper IMO. Tim
 
  • Like
Reactions: Fouledplugs
I actually have the same housing and am going to use it on my LJ. It will be narrowed down from the 67 WMS to 60 and I will marry it to a rodeo rear. I have a similar setup in my YJ, so I have the brakes figured out. Now I just need to figure out mounts for the LJ. These HP housings are a keeper IMO. Tim

I guess I’m just OCD. The only reason I dont want to use it is because of the spring pad that is cast into the center section. I just thought someone may want it more than I would with the same thought, narrow it and use it in a TJ/LJ.
 
Status
Not open for further replies.