Im getting some fox shocks with CDC adjusters installed, does anyone have any pics of how they should mount up?
Does that mean the shocks have 8 soft/firm settings and you keep it on 1 and 2 (the softest?) based on your hard top / soft top? I like that placement you have there. I have the RS5000x and wonder how these compare on their soft settings. I have a super light rig.I have 8 point adjustors on my Foxes. They were set to #1 when the soft top was on. Then I switched to #2 with the hardtop.
At this point, I expect the compression adjustment to be a 2-3 time a year event for me.
Regarding the placement, the cans would not survive long on mine in that location. Try to move them higher up.
View attachment 74861
I tried the harder numbers and didn't care for them. The adjusters are an option when building a custom shock. These particular Foxes are difficult to compare to an off the shelf shock like Rancho, which I do have on the front. The Foxes are both softer where it matters and have higher damping where it matters. Understand that this won't be true of all Foxes. Everything is dependent on the tune. While I think the Ranchos are comfortable and do a good job, they are a bit mushy and too soft on the larger events compared to a tuned shock.Does that mean the shocks have 8 soft/firm settings and you keep it on 1 and 2 (the softest?) based on your hard top / soft top? I like that placement you have there. I have the RS5000x and wonder how these compare on their soft settings. I have a super light rig.
The mounting on mine is entirely not stock. I bought these used and don't know the part numbers. Look up outboarding to learn more.@jjvw which part number are those? Also are there any mods like relocation brackets for your shock?
I am using the following part #
985-26-108
985-26-112
Thanks!I tried the harder numbers and didn't care for them. The adjusters are an option when building a custom shock. These particular Foxes are difficult to compare to an off the shelf shock like Rancho, which I do have on the front. The Foxes are both softer where it matters and have higher damping where it matters. Understand that this won't be true of all Foxes. Everything is dependent on the tune. While I think the Ranchos are comfortable and do a good job, they are a bit mushy and too soft on the larger events compared to a tuned shock.The mounting on mine is entirely not stock. I bought these used and don't know the part numbers. Look up outboarding to learn more.
@tworley are the US spec frames different? mine is a 2005 GCC spec Sahara
Where did you get your tuned foxes? I’m considering the savvy resivors that are tuned but they don’t have the adjustable dial (I’m pretty sure).I tried the harder numbers and didn't care for them. The adjusters are an option when building a custom shock. These particular Foxes are difficult to compare to an off the shelf shock like Rancho, which I do have on the front. The Foxes are both softer where it matters and have higher damping where it matters. Understand that this won't be true of all Foxes. Everything is dependent on the tune. While I think the Ranchos are comfortable and do a good job, they are a bit mushy and too soft on the larger events compared to a tuned shock.The mounting on mine is entirely not stock. I bought these used and don't know the part numbers. Look up outboarding to learn more.
Talk to @pcoplin.Where did you get your tuned foxes? I’m considering the savvy resivors that are tuned but they don’t have the adjustable dial (I’m pretty sure).
On the TJ I wouldn't actually recommend the basic low speed compression adjuster. It tends to make it too harsh, I think you will get a better ride with just a solid tune. The Dual Speed Compression adjusters, on the other hand, work very well. They would likely double the cost of the shock though, as they would be a custom build.
I really think you'll be happy with a good base tune with the Fox Factory Series or Radflo smooth body.