- Price
- 0
- Location
- Waterloo, Iowa
Just replaced my axles as I needed a better gear ratio and ran across a set of 373 drop in axle assemblies. Now I have a set available.
Dana 30/35
3.07 gear ratio
105k miles
I planned on stripping them and pulling the axles. The only thing I have pulled are the brakes. The rear still has good cables attached for the e-brake. I am willing to trade them complete sans brakes for a pair of new brake dust shields or if you just want the housings, I will pull the axles and you can come get them for free. I'm at 50701 and will not ship. Ask for pics in a PM and I will send them to your email - high res
For transparency, one of the lower CA brackets is a little buggered up as I had to cut a seized bolt out. It's probably just fine but as stated, transparency. The t-bar bracket may have been drilled out as I was running a MetalCloak t-bar.
Dana 30/35
3.07 gear ratio
105k miles
I planned on stripping them and pulling the axles. The only thing I have pulled are the brakes. The rear still has good cables attached for the e-brake. I am willing to trade them complete sans brakes for a pair of new brake dust shields or if you just want the housings, I will pull the axles and you can come get them for free. I'm at 50701 and will not ship. Ask for pics in a PM and I will send them to your email - high res
For transparency, one of the lower CA brackets is a little buggered up as I had to cut a seized bolt out. It's probably just fine but as stated, transparency. The t-bar bracket may have been drilled out as I was running a MetalCloak t-bar.