Front steering alignment post lift

[akajibio]

TJ with 6” lift steering set up suggestions …….

 

[Jerry Bransford]

Factory toe-in .30 total. Assuming 35" tires, 4.5 minimum but 5-5.5 degrees of caster angle is better if you can get it.

 

[akajibio]

Factory toe-in .30 total. Assuming 35" tires, 4.5 minimum but 5-5.5 degrees of caster angle is better if you can get it.

Factory toe-in .30 total. Assuming 35" tires, 4.5 minimum but 5-5.5 degrees of caster angle is better if you can get it.

Does

 

[akajibio]

Should caster angles match R-L on alignment sheet?

 

[Jerry Bransford]

Should caster angles match R-L on alignment sheet?

No, the caster angles are designed to be slightly different from each other.

 

[akajibio]

No, the caster angles are designed to be slightly different from each other.

So this alignment sheet does not call for any adjustments on a Jeep that has adjustable CA, TB?

 

[akajibio]

No, the caster angles are designed to be slightly different from each other.

 

[Jerry Bransford]

Did you intend to add a comment along with that printout?

 

[akajibio]

Did you intend to add a comment along with that printout?

Yes, my question is, does this printout suggest the need for any adjustment if one has adjustable control arms and track bars?

 

[Jerry Bransford]

Yes, my question is, does this printout suggest the need for any adjustment if one has adjustable control arms and track bars?

As said a couple times your numbers are fine as-is.

 

[CharlesHS]

Would that left front camber reading mean that his ball joints on that side are worn OR more worn than the other side ?