Front turn signal & marker light harness part number on 2005?

Zoner613

Zoner613

New Member
Original poster
Joined
Jul 23, 2024
Messages
12
Location
Black Mountain, NC
Anyone know if this harness has a name number? It’s simple to find for a JK, but can’t find any reference to it for my 2005. People I bought it from stripped the fenders off. When they put their unwanted fenders back on they didn’t bother to wire the turn front turn signals or marker lights. Left it at a garage for two weeks. They came up with zero results. I’ve been sending out feelers to people parting out 2005s & 2006s. Any insights would be appreciated. First pic is a shot off another TJ. Second pic is all I have dangling.

IMG_5354.jpeg


IMG_5155.jpeg
 
The wiring for the fenders looks to be part of the main loom that runs across the firewall at the back of the engine bay, and down both sides of the engine to the headlamps and fenders. Excluding about a dozen export part numbers, there are about 20 part numbers with various options listed.
The options are only listed as three letter codes and each code would need defining to identify the part number you would require.
It may be simpler to buy connectors for the front and fender turn signals and make your own fender looms to splice into the main wiring.

Not sure what that connector is. Where the wiring runs from and the wire colours going to it would help identify what it is for.
 
If you go on ebay there should be a bunch. Search for your model and year and you will be able to see different ones. Main difference being with or without fogs. You are looking for the headlight harness. It plugs in near the abs tray and connects to the headlights, foglights, turn signals, parking lights...maybe horn(s) and washer fluid sprayer motor too if I remember. Be prepared to wire in new parking lights. The connectors go bad pretty often and people mess with them too. I just had to replace headlight connectors as well, they corrode and melt.
 
Headlights work. I’m not technically inclined. At least not with wiring. Was gobstruck that my shop l ignored the request to troubleshoot it. Seems like it’s a harness. Talking to a guy with a wreck tomorrow. Maybe something will come of that
 
Something lost in communication here. You said you need the harness. The harness is all one piece with the turn signal connectors. Your second pic looks to be just a foglight connector. Are you just looking for the lamp socket in your first photo? Or none of the wiring or connectors in the first pic is actually on your Jeep? Is that all missing?
 
Vtx531 said:
Something lost in communication here. You said you need the harness. The harness is all one piece with the turn signal connectors. Your second pic looks to be just a foglight connector. Are you just looking for the lamp socket in your first photo?
Click to expand...

The first pic is a shot I took off another vehicle. I don’t have a fog light for reference. It was dangling & I took a pic of it assuming it might be connector for the turn signal & marker light
 
Zoner613 said:
The sockets are there. The wiring is missing
Click to expand...

So if the headlights work but the wiring for the turn signals is missing... either

A. They cut off the turn signal wiring
B. It's rolled up or stuck somewhere inside the engine compartment

Maybe you are lucky and its there somewhere. If you trace back from the headlight wires under the hood, do you see it somewhere or see wires cut off?
 
Top Bottom