Getting ready to lift my TJ!

[JeepTJ02]

I bought my wife a 2002 Jeep Wrangler sport model for a good deal last year. The previous owner installed a 3/4” spacer in the front along with 15x8 wheels and 32/11.50 MT’s. It looks good, but my wife wanted some lift on it, so here we are. This Jeep will see little to no off road use, and if it does it will be very mild. This is a 5th vehicle for us that gets driven on occasion. I have the parts listed below here for it…anything else I should add?

•BDS 3” front coils
•BDS 2” rear coils
•Rancho RS55128 front shocks
•Rancho RS55240 rear shocks
•OME rear track bar relocation bracket
•Teraflex transfer case drop
•JKS steering stabilizer

Thanks for the help!

 

[primetime4]

If you are going to center the axle in the rear I would include an adjustable track bar to do the same in the front vs drilling a hole to relocate.

I would also add extended sway bar end links.

 

[TheBoogieman]

Skip the t-case drop until you see if you get any driveline vibes. If you do, a MML is a better solution IMO.

 

[TheBoogieman]

If you are going to center the axle in the rear I would include an adjustable track bar

That's what the relocation bracket is for. It's not even needed for a small 2" lift.

 

[primetime4]

That's what the relocation bracket is for. It's not even needed for a small 2" lift.

They only indicate one for the rear. If they’re worried about the centering the rear might as well do it for the front.