WTB: Hardtop Wiring Harness

[Maxbrownr8]

Anyone know where I could get my hands on a kit like this for a 2003-2006 hardtop? Or anyone willing to part with their pre-wired oem unit they're not using anymore? And what is the difference between the setups for 97-02 and 03-06, I'm assuming a connector difference to account for the rear dome light on the 97-02 tops? Thanks!

https://www.morris4x4center.com/factory-switch-and-wiring-kit-for-hardtop-82208907.html

 

[fxrsliberty]

The harness connector where the top and the tub connect is different. Not sure why, I bought that kit 4 years ago, I needed to make some repairs, it was cheaper then the individual parts.

Sent from my Pixel using Tapatalk

 

[Steel City 06]

That kit is out of production. What I did is bought the body side harness and then copied every single wire that is included in that kit. You will need:

1. Body side harness
2. Check valve (early JK check valve works)
3. Washer fluid hose or other generic hose
4. Washer fluid bottle with at least 1 extra pump
5. 12 AWG and 18 AWG wire
6. Defrost and wiper switch
7. Old wiring harnesses to strip pins from
8. Assorted connectors, zip ties, electrical tape, solder, heat shrink, etc.
9. Defrost relay
10. Fuse tap and fuse

The switches, pump, and bottle I bought from Davey’s Jeeps. I bought the JK check valve from a dealership. For the body side harness, look up the 97-02 to 03-06 connector converters. I simply bought one of those and cut it in half.

Then go into the factory service manual and copy every single wire associated with the kit. Hardest part is figuring out what size pins will fit in the existing harnesses at the instrument cluster harnesses and master harness.