I had the dash and steering wheel removed to replace both the heater and evaporator cores. I have everything back together and have two issues
1) The airbag light on the dash is on. I was very careful not to turn the steering wheel when it was removed and the horn works even when turning the steering wheel, so it doesn't sound like its the clock spring. But I will wait to hear from more knowledgeable sources before I say "no way". The question is which wiring connectors on the steering wheel and/or under the dash are responsible for the airbag?
2) While checking out the airbag fuses, I found a wiring connector with nothing attached to it. It is visible from the removed glove box. Here is the pic of the two wires white and green. Now is it a coincidence that I have two issues or are they related?
Thanks in advance for any assistance.
Bob
1) The airbag light on the dash is on. I was very careful not to turn the steering wheel when it was removed and the horn works even when turning the steering wheel, so it doesn't sound like its the clock spring. But I will wait to hear from more knowledgeable sources before I say "no way". The question is which wiring connectors on the steering wheel and/or under the dash are responsible for the airbag?
2) While checking out the airbag fuses, I found a wiring connector with nothing attached to it. It is visible from the removed glove box. Here is the pic of the two wires white and green. Now is it a coincidence that I have two issues or are they related?
Thanks in advance for any assistance.
Bob