SOLD Lots of misc parts

Status
Not open for further replies.
P

P man

Guest
Price
123
Location
Washougal Wa 98671
I can add pictures of anything you are interested in. I can ship anything as long as you are aware it's going to be expensive. I am near Vancouver Wa and Portland Oregon as a reference.

1997-2002 sound bar complete condition of speakers unknown $50

Tub to fender braces lots to choose from but I probably won't have color matches $20 each

1997-2002 pass seat mount with seat belt $20

2 1997 and 1998 heater boxes without ac 1 has been cleaned inside and out and a new heater core installed $150. The other is $100 condition unknown but nothing externally broken or damaged.

1997 gray glove box has scratches $5

Set of smittybilt wide flares that have been painted red with hardware $100

Rear oem bumper no ends $10

1997 flame red cowl panel good shape $20-SOLD

Oem black fenders rust free minor damage to each $100 each-SOLD

97 only tail light assemblies nice shape $20 for the pair

Np231 transfer case shifter complete $40-SOLD

Ax15 or nv3550 steel transmission mount. $40

Rubicon express lower control arms. These were removed from a tj with 5.5" lift. They will need totally gone through and rebuilt. $50 for all 4

Rubicon express front adjustible track bar needs axle side bushings replaced. $40

1997-2002 front seats with bases good shape need cleaning $200

2003-2006 from outer seat belt retractors good shape $20 each-SOLD

2 passenger side air bags $25 each

1997 only steering wheel and air bag $75

20220122_170647.jpg


20220122_170606.jpg


20220122_170600.jpg


20220122_170557.jpg


20220122_170553.jpg


20220122_170547.jpg


20220122_170543.jpg


20220122_170523.jpg


20220122_170515.jpg


20220121_153720.jpg
 
Last edited by a moderator:
I need a bag of misc bolts. The bolts that hold the front fenders to the brace. And the bolts that mount the fenders to the tub. And the bolts that mount the tub to the rollbar at that B pillar.

Also a GOOD pair of tailgate hinges. White if you got them second color choice would be black. But I can repaint if I have to.


Also if you have wiring I need some parts of one.
 
I need a bag of misc bolts. The bolts that hold the front fenders to the brace. And the bolts that mount the fenders to the tub. And the bolts that mount the tub to the rollbar at that B pillar.

Also a GOOD pair of tailgate hinges. White if you got them second color choice would be black. But I can repaint if I have to.


Also if you have wiring I need some parts of one.
I throw all my bolts in a plastic bin you are welcome to dig through them and take what you need

I dont have any tailgate hinges right now

I have shit loads of wiring you are welcome too
 
I throw all my bolts in a plastic bin you are welcome to dig through them and take what you need

I dont have any tailgate hinges right now

I have shit loads of wiring you are welcome too

Sounds like I might have to take a trip and come visit.
 
  • Like
Reactions: P man
Didn’t see a picture of the front seats, do you have one or two to share? Im not in dire need, but if they were fully operational and in good shape I’d make the 2 hour drive. My drivers side is duct taped up and has some decent seat covers to hide it. Passenger side, the pull cord to tilt forward is cobbled up and works, but it’s a PITA to do. Thanks
 
Here are a couple pics..they are nicer than most but need a good cleaning. I have a guy that can professionally clean them for $50

20220110_123927.jpg


20220110_123934.jpg


20220110_123944.jpg
 
  • Like
Reactions: DaYooperTransplant
Do you have any pdc wire harnesses. Runs from PDC accross engine bay to under drivers side dash. 4cyl manual.
Here is the part number.

4E33C0E7-7481-4850-8EB7-CFECA2DCB8B5.jpeg
 
Status
Not open for further replies.