SOLD Mopar Rock Crawler Rear Bumper

Status
Not open for further replies.
IPerkWVU

IPerkWVU

TJ Addict
Supporting Member
Joined
Feb 11, 2018
Messages
2,221
Location
Charlotte, NC
Price
270 shipped Continental US
Location
Indianapolis Indiana
Have a Mopar Rear Rock Crawler Bumper for sale, looking for someone to bring this back to life. I'm selling as I’d like to have a bumper with better recovery options.

Want to be transparent, found this in rough shape and had it professionally mediablasted, you'll see pitting (bad in some areas) and rot that was blasted away on one side of the tube. Other side of tube is in good shape Lots of pictures below.

If I was going to restore, I'd trim down the tubing on each side (tube would still tuck under the tub), maybe use a bit of metal filler to smooth out a few places and repaint with a heavy textured black but figured I'd sell bare steel to let the next owner make those decisions.

Will be happy to send additional pics.

Looking for $200 + Buyer pays shipping costs (would have to look into how to ship something like this)
E536D62D-79CE-4617-8555-0DC8012ADADF.jpeg
078B903D-AF90-4590-B85E-C5938F469C08.jpeg
81C8BDF1-81E8-43FA-A2F4-5180AF773EAE.jpeg
7742D49C-D17C-40B0-9079-35DC2BE9ADA5.jpeg
FD4DD075-9B5D-4F22-B3C2-2BB8F877F3AF.jpeg
EF9597A3-B178-477F-B0FF-991DB7A4F887.jpeg
C7C02E15-573E-4ECB-96BC-917480E4EC3C.jpeg
8ADFC869-1830-40E1-B2FD-E7ACE72764D2.jpeg
3AC06D96-61A8-4AF7-8947-DFF456C100C9.jpeg
BDBF6B89-4F90-4D9C-9646-EC83B462E925.jpeg
EED8B24C-B0AE-4180-AD7C-A468C27F5377.jpeg
6AB95FEB-4CCD-4681-A727-914C749376F5.jpeg
9BA61CAE-3242-4044-91CE-5DBECF3EAC42.jpeg
 
  • Like
Reactions: Fouledplugs and Starrs
IPerkWVU said:
Have a Mopar Rear Rock Crawler Bumper for sale, looking for someone to bring this back to life. I'm selling as I’d like to have a bumper with better recovery options.

Want to be transparent, found this in rough shape and had it professionally mediablasted, you'll see pitting (bad in some areas) and rot that was blasted away on one side of the tube. Other side of tube is in good shape Lots of pictures below.

If I was going to restore, I'd trim down the tubing on each side (tube would still tuck under the tub), maybe use a bit of metal filler to smooth out a few places and repaint with a heavy textured black but figured I'd sell bare steel to let the next owner make those decisions.

Will be happy to send additional pics.

Looking for $200 + Buyer pays shipping costs (would have to look into how to ship something like this)View attachment 46249View attachment 46250View attachment 46251View attachment 46252View attachment 46253View attachment 46254View attachment 46255View attachment 46256View attachment 46257View attachment 46258View attachment 46259View attachment 46260View attachment 46261
Click to expand...
Really just that 1 tube that is rotted. Wonder how one would repair that? Would make a good addition to my future LJR build unless @techster82 sells me his first or @Jeepersteve71 sells me his hahaha
 
That's by far the worst of it, I'd also recommend whoever takes it to spray eastman internal frame coating through the tube. The pitting locations are all on the underside of the bumper or against the cross member. Willing to snap additional pictures if there's questions about it. If you look at the first pic, it looks good from that vantage point, it's just the backend and the one tube that's in rough shape.

Sent from my Pixel 2 using Tapatalk
 
Starrs said:
Really just that 1 tube that is rotted. Wonder how one would repair that? Would make a good addition to my future LJR build unless @techster82 sells me his first or @Jeepersteve71 sells me his hahaha
Click to expand...

I'm so put out with my build moving like molasses in winter that I'm almost ready to sell you the LJR bumpers and all!
 
Will stop by the UPS store on the way home, any other suggestions on shipping vendors I should look into?

Sent from my Pixel 2 using Tapatalk
 
Id love to get a front and rear and start building “clones”

This one is pretty far gone with the pitting. But still a good purchase for someone looking to modify it.
 
  • Like
Reactions: cjaama
Yeah, it's the packaging from the UPS store that makes the costs add up, the bumper weighs less than 25lbs. After talking with the UPS store, for them to build a box, package (bubble wrap and penuts), and ship would be around $115-$130.

Could probably do it cheaper but that's one option that would get it to the destination safe. Will look into the potential buyers preferred shipping option if interested.

Sent from my Pixel 2 using Tapatalk
 
Fouledplugs said:
please don't tempt me
Click to expand...
It wants about 2" of that tube cut off, a few coats of a textured paint and it would look good. I'm open to offers.

My OME heavy spings need more weight back there than this will give me in the summer time...

Sent from my Pixel 2 using Tapatalk
 
I’d take this off your hands if shipping didn’t cost a mortgage to have shipped to Canada.

Would make for a good project to fab up the Jk tire carrier to it.


Sent from my iPhone using Tapatalk
 
  • Like
Reactions: Chris
Yea I bet Canada shipping would be pretty pricey. Will be a project for someone eventually, or I'll fix it up if it sits in my basement for long enough.

Sent from my Pixel 2 using Tapatalk
 
Status
Not open for further replies.
Top Bottom
Back