California NorCal: Help with Lift Install for Beginner?

Clean looking wheel. Doesn't say what the back spacing is though. Get a fresh set of lug nuts to complete the look.
 
I'm also debating going with something like this

and then going with a pretty aggressive tire like STT Pro as I love that look. (Saw some pictures on another forum I can't link to :p)
 
Hi Tom,
I just saw your post from about a month ago. I’m in the east bay and have some more economicical resources than those you have mentioned. Feel free to send me an email to mikeskiw at gmail if you need any guidance. I’ve made enough mistakes already to have learned quite a bit about these TJs.
 
My 2.5” lift I had a seized bolt on the front shock which was a pain to get off. Besides that it went pretty smooth no vibes although a lot of learning as I did it myself.

My 4” lift getting the springs in was a pain. Also had to cut my rear spring perch as it was rubbing against the shocks.
 
  • Like
Reactions: Alex01
What was the biggest issue when installing?
Mine was getting my springs in. I couldn't get my axle low enough in my parking lot.
20180812_091942.jpg
 
  • Like
Reactions: AJBlack98TJ