Sorry sir. I sold the Grill assemblyHave I asked you about the grille assembly, if not do you have it?
Sorry sir. I sold the Grill assemblyHave I asked you about the grille assembly, if not do you have it?
Do you by chance have a photo handy? I can look at my TJ to see what they look like but I won't be back with it until late tomorrow (Monday night). I remember selling the Sound bar but don't recall if the bolts went with it.
Hi,
I don't have the windshield hinges but I do have cruise control parts. I have the clock spring, the controls from the steering wheel, and the servo. I already pulled the controls and the servo but need to get the clock spring from the steering wheel.
Let me know if interested in any or all of these parts and I'll get you photos and figure out a fair price (will need your zip if you want them shipped). I was going to wire into my TJ but I don't have the connection from the factory and didn't want to fool with splicing in the wiring. Here's the instructions I found for the OEM kit they used to sell back in the day. I have everything but the wiring assembly (#4)
Thanks,
DT
Hey all,
Update as of 3/21/2019:
Thanks to all who have purchased parts for me. You guys are really awesome and I hope the parts are suiting you well. I made sure to show Chris some appreciation for having this forum not only for the brotherhood and knowledge sharing but for for folks to sell parts.
This adventure has gone much faster than I could have imagined and I learned a lot by dismantling the Jeep. I was able to make a few dollars that are being invested back into my personal 2000 TJ. I hope to be putting on my suspension in the next few weekends then getting back out in the woods of North GA and TN.
- So.. Here's the basics of what I have left:
- ITEMS STILL AVAILABLE
- - NP 231 transfer case
- - Hood Cowl Steel Blue color paint code PBQ
- - Gas Tank Fuel Cell (Skid is pending sale)
- -Front track bar and sway bar
- -Front Steering Drag Link, steering stabilizer
- -Stock Suspension
- -Steering Gear Box
- - Radiator (fairly new)
- - Windshield wiper motor and wiper arms
- - EVAP System
- - Clutch Master and Slave Cylinder (appears fairly new)
- -Pedals (Gas, Brake, Clutch)
- -Cruise Control Servo + control switches on steering wheel + clock spring
- -misc random little stuff
———————————————————————————
Original Post
I'm finally getting serious about this Donor Jeep I bought to part out. It's a 2001 Sport with clean title and 124,7xx miles on it. Frame is pretty damn rusted and the underside skid plate has broken away from the frame... The rest of the Jeep including the Tub look great. I've sold a number of the little things to a lot of folks here on the forum and through other channels but its time to start moving the rest of the parts.
Here's a little about this Jeep. I met this older gentleman who was selling this Jeep. He brought it to a local Jeep shop to get the tail gate fixed. Reputable Shop (Fortec) called his attention to the frame issues so he just left it where it stood on the lot and didn't want to deal with the Jeep. I tried to get him to do a frame swap and sell it but he didn't want any part of it. After much deliberation with my brother who runs the service and body shop for a major car dealership, I decided to simply buy it, harvest some stuff for myself, and sell the rest to do some upgrades and get a new suspension for my personal TJ. Before purchasing, I ran the carfax and confirmed miles of the car and the clean title which I have.
details: VIN 1J4FA49S21P374437
--Cruise Control components all but the wire harness (servo, clock spring, steering wheel controls are in hand)
-Full Steering column minus the airbag
-Steel Blue color paint code PBQ hoot cowl
-Dash (agate dark grey color) I also have the center radio bezel. One of the vents on the Radio Bezel has 1 louvre that has come loose and doesn't turn with the others.. very minor unless you're OCD (like me)
-Hood has one little small dent that I never noticed until I washed the car but it's there.
-I don't find any rust elsewhere on the body accept for a small spot inside the cabin under where the rear seat was. see tub description below. If I find any, I'll be quick to amend my descriptions and be transparent with you all.
-Going to pull the engine this weekend with the help of an experienced mechanic 4.0L with 124,7xx miles. I have video of it running. It's runs great.
-NP231 transfer case will be pulled this weekend.
-Jeep has a Dana 44 3.73 Rear Axle Ratio
-in the back of the tub under the passenger seat, there is some very light surface rust at one of the seams (photo attached)
-Fenders have some paint dulling. The PO had some stupid plastic faux diamond plate thing covering it.
Let me know if you're looking for something. Please be patient with me. I have a family, I coach baseball, and have a full time professional career. This is my hobby so I may be a little slow or uncertain of when I can commit to harvesting a particular part if it's one I need some technical help pulling. I'm reputable as noted by some on this forum whom I've sold parts. I'm not a Jeep expert so don't surprised if you stump me. I'm on this forum about every day so I'll be responsive.
Here's a few photos I took when I got the Jeep and gave it a bath.
Happy to field questions and discuss if there is anything you may want or need. The Jeep is in Atlanta and I'm not really equipped to ship stuff out via Freight. I do make business trips up to the Carolina's and Tennessee about every month or so. If it can fit in my company car (Subaru) I'll consider delivering and getting as close to you as possible during one of my trips.
So just be patient if you would and I'll work with everyone as best I can.
Thanks guys.
Dan
Do you have the center console vents? If so how much?
sorry.. those were sold. The fist post has been edited and reflects basically what I have left. sorry.. not much left on the interior.Do you have the center console vents still available and is so, how much to include shipping to 76123?
Thanks,
Rod
I may have overlooked it - however, do you have the swaybar cover still? If so - what's the price shipped to 80130. Thanks!
What all is left of this, edit in first post current? I need some mirrors, and hardtop (I'm sure that's already gone though)
What all is left of this, edit in first post current? I need some mirrors, and hardtop (I'm sure that's already gone though)
Let me know once you get it, some pics n junk and we will see.Still looking for a hard top? I just purchased another parts jeep and it will be delivered next week. It has a black hard top that looks in good shape but likely some paint fading. I'll be taking the doors for myself and a few odds and ends and will be selling off the rest of the Jeep if you need anything. It's a 98 Sport in Chilly Pepper Red.
Let me know once you get it, some pics n junk and we will see.
I do still need a passenger side mirror too.
I may have overlooked it - however, do you have the swaybar cover still? If so - what's the price shipped to 80130. Thanks!
Hey there,
Still looking for the Jeep embossed cover for the front sway bar? I just picked up another parts Jeep for the Doors and it looks like this part is still on there. The Jeep gets delivered next week and if you're still looking for the part, let me know and I'll get you some photos with its condition.
DT
Dan T. any chance you might have the top ac/heat air vents available ?Hey all,
Update as of 3/21/2019:
Thanks to all who have purchased parts for me. You guys are really awesome and I hope the parts are suiting you well. I made sure to show Chris some appreciation for having this forum not only for the brotherhood and knowledge sharing but for for folks to sell parts.
This adventure has gone much faster than I could have imagined and I learned a lot by dismantling the Jeep. I was able to make a few dollars that are being invested back into my personal 2000 TJ. I hope to be putting on my suspension in the next few weekends then getting back out in the woods of North GA and TN.
- So.. Here's the basics of what I have left:
- ITEMS STILL AVAILABLE
- - NP 231 transfer case
- - Hood Cowl Steel Blue color paint code PBQ
- - Gas Tank Fuel Cell (Skid is pending sale)
- -Front track bar and sway bar
- -Front Steering Drag Link, steering stabilizer
- -Stock Suspension
- -Steering Gear Box
- - Radiator (fairly new)
- - Windshield wiper motor and wiper arms
- - EVAP System
- - Clutch Master and Slave Cylinder (appears fairly new)
- -Pedals (Gas, Brake, Clutch)
- -Cruise Control Servo + control switches on steering wheel + clock spring
- -misc random little stuff
———————————————————————————
Original Post
I'm finally getting serious about this Donor Jeep I bought to part out. It's a 2001 Sport with clean title and 124,7xx miles on it. Frame is pretty damn rusted and the underside skid plate has broken away from the frame... The rest of the Jeep including the Tub look great. I've sold a number of the little things to a lot of folks here on the forum and through other channels but its time to start moving the rest of the parts.
Here's a little about this Jeep. I met this older gentleman who was selling this Jeep. He brought it to a local Jeep shop to get the tail gate fixed. Reputable Shop (Fortec) called his attention to the frame issues so he just left it where it stood on the lot and didn't want to deal with the Jeep. I tried to get him to do a frame swap and sell it but he didn't want any part of it. After much deliberation with my brother who runs the service and body shop for a major car dealership, I decided to simply buy it, harvest some stuff for myself, and sell the rest to do some upgrades and get a new suspension for my personal TJ. Before purchasing, I ran the carfax and confirmed miles of the car and the clean title which I have.
details: VIN 1J4FA49S21P374437
--Cruise Control components all but the wire harness (servo, clock spring, steering wheel controls are in hand)
-Full Steering column minus the airbag
-Steel Blue color paint code PBQ hoot cowl
-Dash (agate dark grey color) I also have the center radio bezel. One of the vents on the Radio Bezel has 1 louvre that has come loose and doesn't turn with the others.. very minor unless you're OCD (like me)
-Hood has one little small dent that I never noticed until I washed the car but it's there.
-I don't find any rust elsewhere on the body accept for a small spot inside the cabin under where the rear seat was. see tub description below. If I find any, I'll be quick to amend my descriptions and be transparent with you all.
-Going to pull the engine this weekend with the help of an experienced mechanic 4.0L with 124,7xx miles. I have video of it running. It's runs great.
-NP231 transfer case will be pulled this weekend.
-Jeep has a Dana 44 3.73 Rear Axle Ratio
-in the back of the tub under the passenger seat, there is some very light surface rust at one of the seams (photo attached)
-Fenders have some paint dulling. The PO had some stupid plastic faux diamond plate thing covering it.
Let me know if you're looking for something. Please be patient with me. I have a family, I coach baseball, and have a full time professional career. This is my hobby so I may be a little slow or uncertain of when I can commit to harvesting a particular part if it's one I need some technical help pulling. I'm reputable as noted by some on this forum whom I've sold parts. I'm not a Jeep expert so don't surprised if you stump me. I'm on this forum about every day so I'll be responsive.
Here's a few photos I took when I got the Jeep and gave it a bath.
Happy to field questions and discuss if there is anything you may want or need. The Jeep is in Atlanta and I'm not really equipped to ship stuff out via Freight. I do make business trips up to the Carolina's and Tennessee about every month or so. If it can fit in my company car (Subaru) I'll consider delivering and getting as close to you as possible during one of my trips.
So just be patient if you would and I'll work with everyone as best I can.
Thanks guys.
Dan
View attachment 72791
View attachment 72793
View attachment 72794
View attachment 72795
View attachment 72796
View attachment 72797
View attachment 72798
View attachment 72799
View attachment 72801
Dan T. any chance you might have the top ac/heat air vents available ?
I may be interested, I’ll be excited to see the condition and price you’re asking. Thanks!