After reading a bit on lifts including the beginners guide by Chris which helped a lot for me to understand what would be needed to do this correctly, I've decided to piece together a lift to be able to have a complete list of parts especially with the limitations around a RHD Jeep.
I've tried to stick to decent sources and a reasonable balance of cost. here's what I have come up with so far
Rock Krawler tripple rate coils - 4.5 inch lift
Bilstein 5100 shocks - 4 inch lift compatible
JKS sway bar disconnects front and back
Teraflex rear shock mount extensions
Rubicon Express Extended brake lines
Prothane bumpstop extensions
Rocky Road RHD Adjustable track bar - front
Teraflex SYE
Adams CV driveshaft
Core 4x4 Tier 1 adjustable control arms with Poly bushings
Custom Drag link and tie rod
Custom Rear adjustable track bar
Custom Rear trackbar relocation bracket
Questions I have are;
1. Am I missing something with the above plan?
2. Is there an issue with the half inch difference with the RK coils being 4.5inch lift and the Bilsteins being 4 inch lift compatible?
I've tried to stick to decent sources and a reasonable balance of cost. here's what I have come up with so far
Rock Krawler tripple rate coils - 4.5 inch lift
Bilstein 5100 shocks - 4 inch lift compatible
JKS sway bar disconnects front and back
Teraflex rear shock mount extensions
Rubicon Express Extended brake lines
Prothane bumpstop extensions
Rocky Road RHD Adjustable track bar - front
Teraflex SYE
Adams CV driveshaft
Core 4x4 Tier 1 adjustable control arms with Poly bushings
Custom Drag link and tie rod
Custom Rear adjustable track bar
Custom Rear trackbar relocation bracket
Questions I have are;
1. Am I missing something with the above plan?
2. Is there an issue with the half inch difference with the RK coils being 4.5inch lift and the Bilsteins being 4 inch lift compatible?