Rear track bar relocation bracket needed?

T

TJ's-TJ

TJ Enthusiast
Joined
Mar 28, 2018
Messages
401
Location
MA, USA
We are putting in a 4" lift with adjustable control arms, no t-case drop, new DC driveshaft, so pinion angle has been adjusted. We have a JKS rear adjustable track bar with no track bar bracket.

Track bar is currently limiting down travel, hitting on the top of the axle side bracket and limiting down travel and is also grazing the fuel tank skid plate during travel.

Will an axle side relocation bracket fix this?

Thanks
 
You are correct, a relocation bracket will correct the issues you describe.

The product below will solve your both issues. Raising the bar so does not make contact with the top of the axle and angled out so does not make contact with the gas tank side.

If you can wait a day or two I do have a never installed one at the shop that will be able to sell to you.
1547556723566.png
 
I installed one with my OME 2.5 lift for those reasons with an adjustable track bar. Also did it as I realized i may go larger in the future.
 
Top Bottom
Back