Replacing OPDA with Crown unit, but lost the gasket—replacement options?

[fizzlebottom]

I bought the Crown unit probably 2 years ago and am going to install it finally. Checking the box, there's no gasket though, so either I lost it or it never came with one. Can't find a P/N in the 2005 factory parts catalog or on RockAuto. Worst case scenario, I'll just cut a new one from some blank Fel-Pro material.

Anyone know if the OPDA gasket is available somewhere?

 

[CharlesHS]

I think you are on the right track to cut one out....
Shouldn't be too difficult to create one from the proper gasket material and a little patience.

 

[cpwolf]

Is permatex an option? Would be a pain to clean in that spot, but put it on and should be good for a long while and

 

[Bsulzberger]

Wouldn’t use permatex you need to be able to rotate it if you are not aligned. I used this from Napa. It seems to be holding.

https://www.napaonline.com/en/p/FPB70051

 

[MutantNinjaTJ]

use the old one that's in place now, they are pretty durable.

 

[fizzlebottom]

Wouldn’t use permatex you need to be able to rotate it if you are not aligned. I used this from Napa. It seems to be holding.

https://www.napaonline.com/en/p/FPB70051

I'll give the one from NAPA a try since there's a store right down the street from me. Thanks much.