Sway bar cover bolt size?

[Dunkut88TJ]

I removed my winch and plate today to try and salvage them as they look terrible and are in rough shape. I purchased a stock swaybar cover off a TJ Lot but don’t have the fasteners for it. Would anyone happen to know what size that bolt that goes into the frame is?

 

[P man]

It's a sheet metal ish screw 10mm head..

 

[Jerry Bransford]

This is one of the bolts the Mopar parts catalog doesn't give a size for but it's Mopar p/n 06504723. With that new of a Jeep I'm going to guess it's a metric size.

 

[Dunkut88TJ]

This is one of the bolts the Mopar parts catalog doesn't give a size for but it's Mopar p/n 06504723. With that new of a Jeep I'm going to guess it's a metric size.

So I did some googling and found out thanks to @mrblaine that the bolts that hold the stock license plate mount to the tub are the same size I took one out and tried it and it worked. So here I am at Ace hardware! Thanks @Jerry Bransford

 

[Dunkut88TJ]

M6 1.0 was the size in case anyone needs it!

 

[Jagguy]

I tapped mine out to 1/4-20. Easy to do and didn't need a parts store run!

 

[SeanMo]

Thanks for this! Was wondering the same thing - need to stock up on diff bolt sizes

 

[Terry from Texas]

I had some extra 6mm 1.0 pitch bolts. Ran a tap through and installed.... Works great.