Have a 99 tj. After lifting the carpet I noticed a lot of rust on the passenger side front floor. The drain hole completely rusted through.
My thoughts on a quickie fix :
1. Clean up area and remove flaked rust, then sand.
2. Eastwood rust conververter. Top and under floor.
3. Eastwood rust encapulator top and under.
4. Lay fiberglass inside over floor board, and recut drain plug holes.
5. Sand and rattle can it.
What are yalls thoughts on this repair?
My thoughts on a quickie fix :
1. Clean up area and remove flaked rust, then sand.
2. Eastwood rust conververter. Top and under floor.
3. Eastwood rust encapulator top and under.
4. Lay fiberglass inside over floor board, and recut drain plug holes.
5. Sand and rattle can it.
What are yalls thoughts on this repair?