When I got my Jeep close to three years ago I decided to go crazy and replace everything on it to make it last as long as possible and run great! Unfortunately, that ended up being a big mistake that I have paid for very deeply as far as my pockets are concerned. One of the mistakes I made was replacing the fuel injectors with some standard ones from Autozone made by Duralast. Ever since that day I have had random misfire codes all the way from P0300-P0306! For the past two years I have been chasing these misfires and have replaced every sensor on my Jeep, I have replaced the entire ignition system, I have replaced the spark plugs multiple times, I have replaced the fuel module twice even though the pressure was good, I have replaced the vacuum lines, I have replaced the valve springs, I have replaced the harmonic balancer, you name it and I've done it! I was convinced that it couldn't be the injectors I put in because the resistance on all of them is good but now I am finally flat broke(literally) and jobless and need this Jeep to run right so I can sell it and hopefully eat soon! I never thought that perhaps the spray coming out of the injectors could be the issue but I am inclined to believe that this is the cause of the misfires! Can anyone recommend a set of injectors that are top quality and will provide a good enough spray that will hopefully get rid of these misfires?