What did you do to your TJ today?

[Wittakoski]

Threw the Bedrug front and rear kit in. Should help with noise and insulation a bit better than the sprayed tub alone. Also tried to tackle a locked and shut stuck passenger door. Cannot figure it out after numerous YouTube and forum reviews. Called a shop and getting professional help Monday.

 

[Claybirdd]

Replaced 2 blinkers and my backup lights. But more importantly, changed my transmission fluid to Redline MTL. Already noticed a slight improvement just driving home from work.

 

[dschwes]

A BL would make it fit on the stock carrier. I run 35s on the stock carriers with a little help

@j8ksdad was mentioning that he was working on fitting his 32x11.5 tires and you said that 32's will fit on the stock spare carrier with an added body lift. Just curious about that because I will be going up to 32's in the very near future. I have a 3 part question,
1. the weight isn't an issue for the carrier to go up to a 32" tire?
2. just how high of a BL would you recommend for a 32" tire?
3. do all BL's require a MML? If so, is that all that's required for a BL?

Someone mentioned not too long ago that this thread is too expensive to keep reading...I have to second that!! HAHAHA

 

[Zorba]

Still working on the Mercedes, finishing up the speaker install. Got the new coverlay installed over the new dash speakers today, blah, blah. Just waiting for the glue to dry so I can install the grilles and call it done.

BUT

The Jeep got this today:

You don't really need one of these nearly as badly as you would in a vehicle with power windows (which is yet another reason I don't like power windows), but there still could be need for it, esp. in a Jeep. Bought it with my "eBay Bucks", and in it went!

 

[Ocho]

Still working on the Mercedes, finishing up the speaker install. Got the new coverlay installed over the new dash speakers today, blah, blah. Just waiting for the glue to dry so I can install the grilles and call it done.

BUT

The Jeep got this today:
View attachment 218026
You don't really need one of these nearly as badly as you would in a vehicle with power windows (which is yet another reason I don't like power windows), but there still could be need for it, esp. in a Jeep. Bought it with my "eBay Bucks", and in it went!
View attachment 218026View attachment 218026View attachment 218026View attachment 218026

I like the one in the 4th photo the best

 

[Hopper]

finally changed that dang rusty bump cap, chewed up jounce and epoxied my bump pucks in. I really hate removing the springs.

 

[scottgraham]

I like the one in the 4th photo the best

I don't know, kind of a toss up for me.

 

[TDB55]

Still working on the Mercedes, finishing up the speaker install. Got the new coverlay installed over the new dash speakers today, blah, blah. Just waiting for the glue to dry so I can install the grilles and call it done.

BUT

The Jeep got this today:
View attachment 218026
You don't really need one of these nearly as badly as you would in a vehicle with power windows (which is yet another reason I don't like power windows), but there still could be need for it, esp. in a Jeep. Bought it with my "eBay Bucks", and in it went!
View attachment 218026View attachment 218026View attachment 218026View attachment 218026

I think we get the picture! Pictures!!!

 

[Gunnersmate]

Got the rear bumper swing away tire carrier design finished today. Picked of some 3/16 plate steel for it. Ordered a Dual Shear Hinge from 4x innovations.

Tire Carrier should be able to hold a tire from a 31 to 40 inch

 

[Hopper]

Got the rear bumper swing away tire carrier design finished today. Picked of some 3/16 plate steel for it. Ordered a Dual Shear Hinge from 4x innovations. View attachment 218042
Tire Carrier should be able to hold a tire from a 31 to 40 inch

Cant waite to see the final project.

 

[Zorba]

I like the one in the 4th photo the best

Yea, I dunno WTF happened there, fixed now.

 

[Moon Eyes]

Noticed yesterday a front turn signal was out so I picked up a new bulb today. When I got home I saw that the new gasket for the rear hard top window I ordered finally arrived, so I threw that on while I was at it. The Mopar gasket seems to fit up pretty good!

What’re did you find a mopar replacement ? Have a issue with mine , thanks.

 

[Gunnersmate]

Here is the Handle/ latch can be either right hand open or left hand swing arm is opposite of my final drawing.

I am at about 200 bucks so far
Includes
Steel 40.00 Drop from salvage yard
Rcvr Hitch came on jeep
Shackle mounts 35.00 Ebay
Dual Shear Hinge 125 4X innovations

Still need
Rear Lights
2 Roto Pak fuel cans and mounts

 

[THEREALJIM]

What’re did you find a mopar replacement ? Have a issue with mine , thanks.

I found it on amazon! Search "mopar 55175041AH"

 

[Ayogeeoh]

Just a wash and wax on a beautiful day here in Florida.

also mom went on her first ride in the TJ

Hope everyone had a great day.

 

[09SPEEDTRIPLE]

cutting out some holes for the arb switch s

 

[Fishtaco]

Ordered a Crown unit a few days ago, looks like its a must for the 06.

So ordered my Crown OPDA on 7th Jan from quadratec and it arrived on 15th Jan shipped from USA to Western Australia 8 days from order to delivery! thats faster than I can get anything shipped within Australia! PA to Perth 11,700 Miles.
I have decided I wont fit it unless I get any problems from the original, so another box to add to my TJ pile

 

[John Cooper]

Well I washed it, or should I say I had my washbay wash it(sometimes it's nice to be the boss)

 

[tr21triton]

So ordered my Crown OPDA on 7th Jan from quadratec and it arrived on 15th Jan shipped from USA to Western Australia 8 days from order to delivery! thats faster than I can get anything shipped within Australia! PA to Perth 11,700 Miles.
I have decided I wont fit it unless I get any problems from the original, so another box to add to my TJ pile

wow they must not of mailed it USPS. i had a front sway bar bushing kit ordered and shipped dec. 12 just got it last week. everything with the post office seems to get hung up in the Northeast US. got parts coming in from N.Y. shipped out on the 12th and hasn't moved in 3 days. sure wish i could get me one of them cushy gov't jobs but my hair aint curly enough !!!

 

[derekmac]

My Antirock and Rock Krawler rear upper and lower adjustable control arms arrived today. I wanted Currie arms, but no one local (or online in Canada) was able to get them. To order from the US, just the rear arms would have cost me over $1,500.