What did you do to your TJ today?

[JeepZilla380]

I like that combo cowl light and antenna mount set up.

I have the same GMR ass radio on my gladiator, also with a ghost antenna. Looking to get a set up for the TJ as well to replace the CB I no longer use.

Thanks! Really wanted to get it out of the way and thought it would look good there. Ordered the drop bracket from Amazon and routed all the wires through the cower area. Great place to hide a few extra feet of antenna cable, and super easy to use the drivers side wiper wiring grommet to get it into the cab.

 

[All 4 Wheelin']

Today I made my TJ watch as I put a new JVC head unit and POLK speakers in my wife's Subaru Impreza.

 

[JeepZilla380]

Today I made my TJ watch as I put a new JVC head unit and POLK speakers in my wife's Subaru Impreza.

Check Engine Light incoming!

 

[antwon412]

Tell us how you really feel about the radio.

Lol. Voice to text failure there.
If I could figure out how to edit my post , I would!

 

[Fulton_Hogan]

Trying to place this tank. Aint that a Chaffee?

I have no idea Chieftain sounds right

M41 Walker Bulldog

 

[Kiwi TJ]

M41 Walker Bulldog

I knew somebody here wouldn’t know the answer…. Thanks 👍

 

[Kiwi TJ]

How far south are you headed? We really enjoyed our NZ trip several years back (2017). We Drove from Auckland to Dunedin. Some fun stuff along the way:
Tongariro National Park (”the hike to Mordor”)
View attachment 393939

View attachment 393938
From the ferry on way from the North to South Islands near Marlborough
View attachment 393937
Westland Tai Poutini National Park
View attachment 393932

View attachment 393929
The Franz Josef Glacier
View attachment 393942
Mount Aspiring National Park
View attachment 393943
Queenstown
View attachment 393944
A lake in the mountains above Queenstown
View attachment 393935
Ready for some shredding after earning the turns outside the bike park in Queenstown

View attachment 393936
Queenstown local dirt jumpers do not mess around. This is a MTB trail, not moto…
View attachment 393945
The Remarkables, near Queenstown
View attachment 393947
Herrington Point/Royal Albatross Museum (like a pre-historic seagull-wing span upto 12 feet😀)
View attachment 393931
Beautiful church in Dunedin
View attachment 393930

Headed down to Christchurch for 2 weeks. There are some really beautiful spots around New Zealand.. I did ghd Tongariro crossing last Year too

 

[Kiwi TJ]

Some more pics of the journey.. getting off the ferry in the South Island and headed down the coast another 6 hours.
Even got to see the local seals on the rocks

 

[TheBoogieman]

Some more pics of the journey.. getting off the ferry in the South Island and headed down the coast another 6 hours.
Even got to see the local seals on the rocks

View attachment 394733

View attachment 394734

View attachment 394735

View attachment 394737

View attachment 394736

View attachment 394739

View attachment 394740

No food pics?

 

[Kiwi TJ]

No food pics?

No sorry Boog but the holiday is not over yet 😉
Oh and Get well soon mate

 

[Zorba]

Installed the 12 O'clock labs speedometer calibrator lump.

It seems to work fine. It would have been nice if the cable had been about a foot longer, it barely reached a quasi-suitable location in the engine compartment. It would have been fantastic if the cable had been about 3 feet longer and the potted control module had been "soft wired" such that it could have been located under the dash in the cab, away from the very high underhood temperatures. But the Jeep is now ready for foties - or 31s!

 

[NashvilleTJ]

Installed the 12 O'clock labs speedometer calibrator lump.
View attachment 394868
It seems to work fine. It would have been nice if the cable had been about a foot longer, it barely reached a quasi-suitable location in the engine compartment. It would have been fantastic if the cable had been about 3 feet longer and the potted control module had been "soft wired" such that it could have been located under the dash in the cab, away from the very high underhood temperatures. But the Jeep is now ready for foties - or 31s!

Fodeez, Zorb, fodeez….

🙂

 

[Zorba]

Fodeez, Zorb, fodeez….

🙂

I stand corrected!

 

[InOmaha]

I may have found my vibration issue. The rear spicer joint moved, but it was sticky. The front flopped around freely.

I'll drive FWD tomorrow and see if the front has any vibrations.

 

[SAWB]

Headed down to Christchurch for 2 weeks. There are some really beautiful spots around New Zealand.. I did ghd Tongariro crossing last Year too

Did you go to that cool shopping mall made with shipping containers ?
I heard they closed it and I thought it was so cool , wish I could have seen it !

 

[xxthebombxx]

Finally had some time for jeep stuff over the last week or so. Installed a new double din, installed new switch housing in the factory location, relocated my locker switches from vent to the new spot, (if anyone has a factory dash vent laying around let me know!), have rca's ready for amp. Installed new 5-1/4" components with the tweeters mounted on the dash. Today took the rear storage box out to continue on sub and amp installed. I had everything ready for the sub for a while, just had to install terminals and bolt it in. Got lucky on a random grill fitting good enough to use. It's metal and should protect pretty well. For the amp, I drilled holes and instaled t-nuts. I used rubber spacers to hopefully help with vibration, as well as air flow. Maybe tomorrow or over thr weekend I'll take the seats and console out and run the rest of wiring to the rear to finish everything.

 

[L J]

View attachment 394957

Is that switch bezel a DIY printed thing or did you buy it?

 

[macleanflood]

Is that switch bezel a DIY printed thing or did you buy it?

Looks like the one I had customized from https://www.custom3dfab.com/collect...p-tj-lj-switch-panel-6-oem-4-carling-switches

 

[L J]

Looks like the one I had customized from https://www.custom3dfab.com/collect...p-tj-lj-switch-panel-6-oem-4-carling-switches

View attachment 394965

How's the quality?

 

[NDSpeed]

Started the winter project finally