I got mine from Homedepot.
https://www.homedepot.com/p/Everbil...Mount-Drawer-Slide-Set-D94224E-ZP-W/302981208
What did you do to your TJ today?
- Thread starter LJRubiconGuy
- Start date
I got mine from Homedepot.
https://www.homedepot.com/p/Everbil...Mount-Drawer-Slide-Set-D94224E-ZP-W/302981208
Thanks. I am looking for something a little longer than 24. I do really like how you used the rails though. I was planning to build a box then a drawer to fit in it. If I do it more like you the drawer can be larger and the entire setup lighter than my plan.
RustyCage
TJ Enthusiast
I was going to do two cooler/cargo sliders on the top deck. I ordered these separately from different vendors as the first set wasn't available when I went back to order the second set. To me, they appear to be exactly the same thing. The first pair from Vadania says the capacity is 156 lbs, the second pair from SDPAWA says the capacity is 264 lbs. I guess I'll use those. China. What are you going to do? Both were over $100.
https://www.amazon.com/gp/product/B07HQKVBM7/?tag=wranglerorg-20
https://www.amazon.com/gp/product/B07JQD366Y/?tag=wranglerorg-20
Then I ordered two pair of these for the drawers. 28" and represented at 150lbs. They came from China in less than a week and the seller confirmed my order by email. These were $75/pair.
https://www.amazon.com/gp/product/B07D6JV73D/?tag=wranglerorg-20
That was my plan too, build a box then drawer, but hubby came up with the L brackets and I liked it.
Brianj5600
TJ Expert
I trimmed the fender brace toward the front of the fenders. Full lock, full stuff the tire can catch the brace and pull the fender down. Ask me how I know, Heading for AOP Saturday and will likely need that mod.
Day 7 of the clutch job. I finally got around to pulling the transfer case. (I know you don't have to) but im going to refresh everything while i have it out.
Kiwi TJ
I don't suffer from insanity I enjoy every minute
Supporting Member
Ride of the Month Winner
- Installed power steering pulley
- installed alternator
- installed York compressor
- installed new A/C compressor
- installed 2 new serpentine belts
- installed headers
- installed starter
- installed front driveshaft and set pinion angle
- installed tranny dipstick tube
Quadratec mirrors. Actually pretty happy with them.
P1W
Member
Installed truck Lite knockoffs.
Got a few pics below.
Literally took 20 minutes.
Got a few pics below.
- OEM
- New vs OEM
- New high beam vs OEM high beam
- New
- New low beams
Literally took 20 minutes.
Fixer6
TJ Enthusiast
Day two of Bedrug install over thermal sound deadening from firewall to tailgate. (Yes, I took my time to insure full coverage) Feels like the inside of a Yeti cup now. Hardly any road noise, stereo sounds way better, can hold a conversation with myself without any yelling, possibly gained who knows how many horsepower. ; )
No pictures as I was wearing camo the entire time.
No pictures as I was wearing camo the entire time.
Re-spooled my winch and took the side steps off in prep for Saturday’s wheeling trip.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Wrapped up the frame tie ins for the new rear bumper, thankfully without any drilling.
02GreenTJ
TJ Enthusiast
I juuust ordered the poison spider tie ins. Was hard to pay $50 for some raw steel.
Those look to be designed well. I think I’m another post I saw the nuts for the inside are welded to a bracket and there is an opening to access the body mount bolt. Neither was true with these (but I got them “free” with my bumper, so wasn’t going to complain).
What winch setup do you have with the bracket? I like the look with the stock bumper.
Smittybilt X20 synthetic and smittybilt raised winch plate. Had to trim up the plastic sway bar cover in order to put it back tho.What winch setup do you have with the bracket? I like the look with the stock bumper.