Recent content by 05TJGator

ECCPP Power Steering Gearbox Fit for 2003 2004 2005 2006 for Jeep TJ,2003 2004 2005 2006 for Jeep Wrangler Power Steering Gear Complete Assembly $250 plus freight. Sold Jeep so no longer need.

2005 Jeep TJ SE , Auto , 4.0, 4X4 109,000 miles $13,500 * Reduced * There is no rust anywhere on this Jeep. Frame is coated inside and outside. 15" Steel w/ 31" BFG's Less 5k on them , vented hood, CAI 2.5" lift, All new exhaust, oil pan, tranny pan, adjustable track bars, sway bar links...

So measured the axle and it is only 1/8” off. Disconnected adjustable track jounced it and didn’t move and track bar bolted back up. Spring is seated at the bottom correctly.

How do I measure that properly? Drivers side is perfect up and down. If it was off would that be leaning as well?

I just noticed my passenger side spring is running a little bowed and slightly hitting the bump stop. Any idea’s? 2005 TJ SE RC 2.5” lift Adjustable track bars Rest is stock

Yeah did the old’ pull a fuse and see what stays on and what goes off. Just glad I found it...

Issue found. Was the dimmer wire on my radio.

Update: Removed LEDs and Flasher Module and put back to stock. Still have the same issue. Did not have this before I removed taillights. Cleaned taillights threads and bolts to confirm ground there. It seems it’s getting low voltage or some kind in run and start and not ACC. When in run...

So did a few more items tonight. 1) Removed lights and reinstall bolts. They are a little rusty but looked ok. Lights are nice and tight. 2) checked all fuses and all are good. Only thing I noticed is Fuse #4 has been removed since doors always stay off. 3) Another relay tested and that...

So it’s defiantly not the relay. Put OEM in and does the same thing. Also noticed the dash instrument stays on as well. So ACC and key out works fine. Key in on run or start the issue is there.

Seems to be the correct part number. I’ll try a different brand and see what that gets me.

I’ll take a look at that today and see which one they sent me. Thanks

Here is the link for the kit I put on... https://www.quadratec.com/products/55213_0116.htm I have a 2005 SE with 4.0 and the side markers are still regular bulbs. Only the taillights are LED.

First time posting here and need some help. Have owned my Jeep for about a year now and have been replacing about everything on it. Which brings me to this issue. My old taillights where quite corroded and kept burning out bulbs. So I decided to replace them with LEDS. Bought the plug and...